10654034400 Kenmore Refrigerator - Parts

This kit no longer includes the connectors. It is only the tubing/water reservoir. Note: This tubing requires an adapter coupler (PS369735) to take the tubing from 1/4 inch to 5/16 inch.

This clip is sold individually.

This dispenser door pin comes with the washer.

This part is located at the base of the dispenser bay catches small spills and allows them to evaporate. The drip tray is removable for easy cleaning.

Support wheel assembly with bracket. Kit of 2.

This part strips ice from the icemaker mold during the ejection cycle to prevent ice pieces from falling back into the mold.

Once a glass is pressed against the actuator pad it will cause the dispenser to deliver water when activated.

This motor rotates the auger. When the auger rotates, it pushes ice out of the bin, through a chute to the user.

This white icemaker assembly washer is less than an inch long.

This part works in conjunction with the blades for the ice maker.

Sold Individually - 2 screws needed to mount each handle.

Once a glass is pressed against the actuator pad it will cause the dispenser to deliver ice when activated.