61004753 Kenmore Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Ray from Agawam, MA
- Parts Used:
- 12001991
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers
ice dispenser kit
Your video made this repair simple. Thanks for the info. Also received my parts on time. Keep up the good job .
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JW from Garner, NC
- Parts Used:
- 12001991
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
The flapper door broke
I followed the directions from the YouTube video, which were spot on correct! Loved it. No problems. I did have to wind the spring one more turn than it showed on the video, but that was easy to figure out. No problems!
Was this instruction helpful to you?
Thank you for voting!
water dispenser was leaking
Followed the video exactly. Replaced both valves in less than 1 hour. No more leakage. Very simple!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ken from Cleveland, TN
- Parts Used:
- 12001991
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Bracket that moves the ice door chute broke allowing the door to fall into the chute
Watched the video and followed the instructions ... time to repair was slightly longer than expected due to the fact that my fridge had wood panels requiring removal. Still, the video was terrific since I am a visual type person.Part Select service was amazing ... ordered one day and the part arrived at my door the very next day. Had the same type of service on a previous repair to replace the ice crushing part of the ice maker. What a company!!! Thanks so much.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Howard from Fulton, TX
- Parts Used:
- 12001991
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers
Door Kit Broken
I had to buy the ice dispenser solenoid AND door kit just to get the door kit. The little flapper door was all that needed repair. I followed the video and this was so easy.. anyone could do this repair. PartSelect made this small job easy. Many thanks. HBoykin
Was this instruction helpful to you?
Thank you for voting!
My ice chute dispenser door quit opening and closing properly
I replaced the door kit, solenoid and return spring. The old door was worn out and was no longer attached to the return spring. The repair was very simple and the instruction kit sent with the replacement parts was extremely informative and helpful. This repair took less then five minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- GEORGE from JACKSONVILLE, FL
- Parts Used:
- 61005626
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Screw drivers
Ice maker was not making cubes
I watched the instruction video and followed the instructions. Removed the old valves and installed the new one with the same water supply and electric wires
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Eileen from Prattville, AL
- Parts Used:
- 12001991
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
ice door flap had broken off
followed repair insructions. used all parts sent. slight issue getting spring on correctly but once we did we were done!
Was this instruction helpful to you?
Thank you for voting!
Ice maker not producing ice & ice door not closing
After receiving the parts to repair the ice door, I replaced the solenoid and new chute door without problem. Then a problem I had been experiencing for well over a year, re-emerged. No Ice! I realized the icemaker was old, over 12 years and that the Teflon within the wells as well as the contacts for the timer were well worn. The ease of finding parts and the instructions provided by PartSelect, (written, video and users), I would attempt the replacement of the Ice Maker. When I examined the Freezer, I also identified that the Ice Maker shelf and enclosure (where the auger that drives the ice) was broken and barely hanging in place. I quickly identified the additional parts and ordered them. The total repair took about 60 minutes. and was treated to the sound of ice dropping into the bin by early evening. I am very pleased with the service, the quality of the products and the helpful hints from fellow users. I have added PartSelect to my IE favorites and it will be my first stop when I need repairs for any of my appliances.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Frederick from Trenton, NJ
- Parts Used:
- 12001991
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
ice dispenser door support broke
Removed dispenser unit, replaced solenoid and door support, and reassembled. Repair video on website was extremely helpful. Only needed door support but found it was easier to order and install the entire assembly with the new door. Item number PS2003478
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cristine from Ofallon, MO
- Parts Used:
- 12001991
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers
The door to the ice dispenser broke off
When calling to see what the repair would cost my prices ranged from 250.00 to 175.00 with parts and labor. But I decided to tackle this project myself after watching the installation video. My parts arrived quickly and I watched the video had my repair completed within 30min and saved myself over 100.00 dollars. Thank you PartSelect!! The step by step instructions made this project a breeze.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from Heath, OH
- Parts Used:
- 12001991
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Pliers
Plastic tip broke off the insulated flap. Would not seal against icemaker.
Removed two screws from face plate then nudged plate up until it cleared the two top screws. Removed three screws holding the actual kit in place. Gently pulled the unit forward and pulled the water tube out from above the kit, then disconnected the wires connecting the unit. At this time the unit is separated from the refrigerator and you can disconnect the solenoid to remove it. The plunger in the solenoid was a little different from the old one as it connects to the insulator flap bar but Partselect has made a good/easy modification for replacement. Before installation I recommend lubricating the plastic actuator switch. Reverse the procedures you used to access the unit. Very easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Roland from Marysville, OH
- Parts Used:
- 61005626
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
Water not being supplied to ice maker
Very simple. Viewed the video that was linked to the web-page and followed the instructions. Longest part of the process was removing and re-attaching the cover on the back of the refrigerator. The video can do more to describe the repair than my words.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- john from fort wayne, IN
- Parts Used:
- 12001991
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
ice and water would not dispense
Ordered solenoid, watched video, replaced solenoid, works great.
Was this instruction helpful to you?
Thank you for voting!