10653512300 Kenmore Refrigerator - Parts

The heater is located at the bottom of the evaporator. The defrost heater heats the evaporator in the defrost mode of operation. The thermostat must be replaced when replacing the defrost heater.

This door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

This part strips ice from the icemaker mold during the ejection cycle to prevent ice pieces from falling back into the mold.

This kit comes with the compressor relay, overload and cover.

16ml

This is an OEM part sourced directly from the manufacturer. This self-tapping screw is commonly used in kitchen appliances, such as trash compactors and ranges. The uses vary depending on appliance ty...

This is a decorative front cover that is made of plastic that covers the opening to where the icemaker is located and disables contact by the user while the icemaker is engaged.

Once a glass is pressed against the actuator pad it will cause the dispenser to deliver water when activated.

This part is used to hold eggs.

This door gasket is used to make an air-tight seal for the cabinet when the door is closed.

Sold Individually - 2 screws needed to mount each handle.

Once a glass is pressed against the actuator pad it will cause the dispenser to deliver ice when activated.