10657051790 Kenmore Refrigerator - Parts

This is the replacement evaporator drip tray for your refrigerator. It is made of white plastic and is approximately 19 inches by 9 inches. The evaporator drip tray sits below the evaporator to collec...

This part attaches to the drive shaft of the ice dispenser motor.

This part includes 2 shelf support studs.

Sold Individually - Appliance originally takes 2.

This water inlet valve is for the ice maker and water dispenser in the refrigerator. To remove outlet tubing, depress ring that the tube slides into. Please remember to disconnect the power and water ...

Both bottom door hinges are included in this set.

This kit no longer includes the connectors. It is only the tubing/water reservoir. Note: This tubing requires an adapter coupler (PS369735) to take the tubing from 1/4 inch to 5/16 inch.

This clip is sold individually.

This kickplate grille is attached to the bottom of the refrigerator.

This dispenser door pin comes with the washer.

Support wheel assembly with bracket. Kit of 2.