Models > 3639652721 > Instructions

3639652721 Kenmore Refrigerator - Instructions

Jump to:

All Instructions for the 3639652721

Customer:: Phayo from Lake Charles, LA
Parts Used:: WR30X10093
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver

would not "dump" ice cubes

I am more than 80 yrs, always thought I could fix just about everything--but, this looked complicated. Once I received the new icemaker; took a good look where the screw-holes, etc. were, then removed the "old" one. Took about 20 or 30 minutes, then the "new" one was easily installed.

Was this instruction helpful to you?

Customer:: Harold from Abilene, TX
Parts Used:: WR30X10093
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Screw drivers

Ice maker went to sleep and forgot to wake up.

Followed the instructions. Smooth as silk. This part is better than the original. There appears to be a sensor that beeps when the ice reservoir is full.

Was this instruction helpful to you?

Customer:: Robert from Glen Ellyn, IL
Parts Used:: WR30X10093
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Pliers, Screw drivers

Plastic part of icemaker broke

I watched the video and then read the instructions. Emptied and cleaned freezer compartment. Removed old unit and removed part of old unit to be used in new installation. I then installed the new unit and turned the water back on. I let the unit produce over night and through the first batch of ice away. Because of the various regrigerators this ice maker was used I had a little confusion recognizing our model, but worked through this problem useing some common sense. All around I'm very satisfied with the results.

Was this instruction helpful to you?

Customer:: Matthew J from White Plains, NY
Parts Used:: WR30X10093
Difficulty Level:: A Bit Difficult
Total Repair Time:: 1- 2 hours
Tools:: Screw drivers, Wrench (Adjustable), Wrench set

Broken ice maker replacement

Installing the actual ice maker was quite easy. What takes most of the time is preparing the freezer for the install. Need to remove all shelving, (and the door) to gain access to the unit. The ice maker is simple to install once access is achieved. Putting everything back together takes some time.

Was this instruction helpful to you?

Customer:: Allen from Santa Fe, NM
Parts Used:: WR30X10093
Difficulty Level:: A Bit Difficult
Total Repair Time:: 1- 2 hours
Tools:: Nutdriver, Screw drivers

Icemaker leaking water

I had to defrost the freezer to free the icemaker. After that the installation was plug and play with two small exceptions: 1) I had to file down the width of the left hand tine of the old stripper so that it would fit the new icemaker, and 2) the motor housing of the new icemaker was slightly wider than the old one. It fit, but just barely. But I'm back in the ice again, no dripping water, all is good.

Was this instruction helpful to you?

Customer:: Grimes from Bartlett, TN
Parts Used:: WR30X10093
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver

ice maker very slow and arm that controls amount of ice sticking and quit making ice

took 1 screw out and removed ice maker and slid new one in and replace screw and connected power cord

Was this instruction helpful to you?

Customer:: John from Sahuarita, AZ
Parts Used:: WR17X2770
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Broken slide rail

Your online helpful hints made it easy as pie.

Was this instruction helpful to you?

Customer:: Carl from Broomfield, CO
Parts Used:: WR30X10093
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Screw drivers

Ice make stopped making ice

Went to GE website and researched the problem for the model, determined that it was 90% sure it was the Ice maker, I ordered it and it arrived the next day, installed it and it began working immediately,

Was this instruction helpful to you?

Customer:: William from San Tan Valley, AZ
Parts Used:: WR30X10093
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver

Ice Maker stopped working

Took out one hex screw, disconnect electric couplings, pulled original ice maker out and found that the water supply line to the ice maker was frozen solid as well as the shute cup. Used hair dryer to thaw out the line and the cup reinstaled old ice maker and it worked fine. Did not have to use the new part at all at this time. Am keeping new part for future use.

Was this instruction helpful to you?

Customer:: Roy H from Leesburg, VA
Parts Used:: WR30X10093
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver

iCE MAKER LEAKING WATER

Followed the video demo and would have been done sooner but for limited work space- narrow freezer compartment and the release tabs on the electrical plug. First home repair that the air was not blue and got done in under time allocated.

Was this instruction helpful to you?

Customer:: Craig from Eagle, CO
Parts Used:: WR30X10093
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Screw drivers

Replacement Of Ice Maker

Removed old ice maker, then screwed in new ice maker. Only thing that was a little difficult was to hold the auger motor, while trying to unplug the clipped in plug on the old ice maker. I could have used an extra pair of hands.

Was this instruction helpful to you?

Customer:: Conti USA, Inc. from Fort Lauderdale, FL
Parts Used:: WR30X10093
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Socket set

change of ice maker

It was exactly as shown in your instruction video

Was this instruction helpful to you?

Customer:: Paul J from Niceville, FL
Parts Used:: WR30X10093
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Icemaker plastic piece had broken causing ice to not make properly and loose water to freeze things into chunks

I spent 15 - 20 minutes just hunting/deciding which of several sets of parts & directions to follow. The provided directions were not bad; but none of them quite matched my GE ADORA side-by-side model. Once I came up with the actions I would need to take...I was done in 5 minutes! The kit , as I said, came with all the parts one could need (and one or two un-needed parts included for other model GE refrigerators) I am very happy with PART SELECT...altough GE doesn't rate as high with me for their declining reliability.

Was this instruction helpful to you?

Customer:: Priscilla from Marshall, WI
Parts Used:: WR17X2769
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Right vegetable drawer slide rail broken

The repair is somewhat self-explanatory. The old/broken rail which was broken needed to be unscrewed in front and rear, and the new one simply inserted and screwed in. Simple installation. What I REALLY wanted to share, is how impressed I was with the FAST service/speed that the parts arrived. Originally, we thought that just the middle drawer slide needed replacing, so I ordered the middle one and installed it. After installing it we realized that the right slide was broken too, so I ordered that. I placed the order on Saturday and the part was delivered to us on Tuesday!!! SUPURB service!! I will DEFINITELY order my next parts from PartSelect again!! Thanks for wonderful experience!

Was this instruction helpful to you?

Customer:: Eduardo from Arlington, VA
Parts Used:: WR30X10093
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver

No Ice...

Super easy, had my 15 year old do it (with my supervision).
Followed very clear Instructions that come with the replacement...
But, he could not get to the plug location until he removed 4 screws holding the motor assembly that spins the ice in the drawer and moved it out of the way...
Followed the rest of the instructions...
Works like a charm.

Was this instruction helpful to you?

All Instructions for the 3639652721