1069555713 Kenmore Refrigerator - Parts

This part may come with a plastic or metal auger depending on the factory. It will work with your appliance if found with the model number. (Make sure you install properly at back of ice container, be...

Both bottom door hinges are included in this set.

This kit no longer includes the connectors. It is only the tubing/water reservoir. Note: This tubing requires an adapter coupler (PS369735) to take the tubing from 1/4 inch to 5/16 inch.

This clip is sold individually.

Support wheel assembly with bracket. Kit of 2.

11-16 x 3/4 Sold individually.

This part strips ice from the icemaker mold during the ejection cycle to prevent ice pieces from falling back into the mold.

This door gasket is used to seal the freezer door when closed.

The heater is located at the bottom of the evaporator. The defrost heater heats the evaporator in the defrost mode of operation. The thermostat must be replaced when replacing the defrost heater.

This door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

16ml