Models > 2539308700 > Instructions

2539308700 Kenmore Refrigerator - Instructions

Jump to:

All Instructions for the 2539308700

Customer:: Paul from Akron, OH
Parts Used:: 241798231
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver

Ice maker quit working.

The two screws that held the ice maker in place could not be seen do to there location. I could only get one hand inside do to space restriction.So I placed a mirror inside so I could see the screw heads and from point it was very easy to see and line up the nut driver on the screw heads. I then lifted it up and unplugged the wiring and installed the new ice maker. Works like a charm. Paul

Was this instruction helpful to you?

Customer:: Kenneth from Edgewater, MD
Parts Used:: 5303207345
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

Fridge door gasket was torn.

Rolled the old gasket to expose the screws for the door panel. Removed all Phillips head screws with a drill and an extension bit. Once you remove the interior door panel dispose of the old gasket and thoroughly clean the surface both front and back of the panel. Install the new gasket and use RTV silicone sealant on the back side of the gasket to ensure that it remains in place. Keep the door closed for as long as possible to ensure that the silicone cures and the gasket remains in place. Hope this helps.

Was this instruction helpful to you?

Customer:: margaret from washington, MA
Parts Used:: 5303281398
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

broken glass shelf

The "repair" itself was only a replacement of a glass shelf but I just wanted to say that I ordered this part mid-day wednesday and when I got home from work thursday night it was on my deck, I was shocked. Also it was glass and was very securely packaged Great job parts direct.

Was this instruction helpful to you?

Customer:: Eugene from San Francisco, CA
Parts Used:: 5303207230, 5303207229
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

broken door shelf end cap

simply snap R end cap into R slot in door, then slide one end of retainer bar into R end cap, other end of retainer bar into L end cap, then snap L end cap into L slot in door.

Was this instruction helpful to you?

Customer:: Annie from West Plam Beach, FL
Parts Used:: 5303281398
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Broken Glass Shelf

1) Remove glass from shipping Container. 2) Using fingers, place glass ever so gingerly in the shelf tray. 3) Pour a glass of wine to celebrate.

Was this instruction helpful to you?

Customer:: Brian from Louisville, KY
Parts Used:: 5303918277
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

Ice maker would not make ice or fill up

Followed the video instructions posted below the product. Its a tight area to work in but it can be done. It did not immediately start making ice. I waited and waited.... 3 hrs 4 hrs still not filling up or making ice. Finally I decided to pour some water in the tray and see if it would freeze ice and dump it. It did and immediately started to fill up on its own after that! Its been working perfectly ever since! So dont be alarmed if yours doesnt work immediately and try pouring some water in it if yours doesnt being working within several hrs. I am happy I was able to do this myself and save repair man costs. Its just not work the cost they charge for older appliances.

Was this instruction helpful to you?

Customer:: Ronald from Wapella, IL
Parts Used:: 5303207345
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Screw drivers, Socket set, Wrench set

door gasket was broken , sweating and dripping water on the floor

I took the freezer door off took center hinge out , took frig door off , unscrewed inside panel took off old gasket , put the new one on , put inside panel back on , (be sure the flange on the gasket stay's in the groove when you screw it back together) replace doors and anything else that needs replaced ! check the seal !

Was this instruction helpful to you?

Customer:: Dan from New Berlin, WI
Parts Used:: 5303918277
Difficulty Level:: A Bit Difficult
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Screw drivers

Ice Maker replacement

Went well overall. I really thought that you guys taking the time to create a very helpful video was awesome. Thanks for doing that! The only difficulty I had was that my old ice maker had the connection toward the front, while the new one was in the back. So I had to use the adapter and had so much extra wiring to bundle, and tie wrap, with little place to go with it that I got frustrated. Wish I just had the correct replacement wire to begin with. Nonetheless, we are stocked with a full bin of ice after about 3-4 days.

Was this instruction helpful to you?

Customer:: Ricky from Lutz, FL
Parts Used:: 5303918277
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver

Ice maker quit working

loosened two 1/4 in. screws removed ice maker unplugged harness. Plugged back in slid the replacement ice maker over the two screws secured. Done

Was this instruction helpful to you?

Customer:: Rose from Honesdale, PA
Parts Used:: 5303207345
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

gasket was deformed

The gasket was held to the door by the door's interior plastic shelves. Remove the 12 screws holding the interior mold to the door and the gasket comes off too. Then it is just a matter of fitting the new gasket around the mold and then screwing the mold back onto the door.

Was this instruction helpful to you?

Customer:: Philip from Sheridan, AR
Parts Used:: 5303918277
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Screw drivers

icemaker not working

first replaced dual solenoid, then ice maker. still not working. going to chase electrical next

Was this instruction helpful to you?

Customer:: Mary from Black Hawk, SD
Parts Used:: 5303918277
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Pliers, Screw drivers, Socket set, Wrench set

water running over ice machine and into kitchen

Called a repair man. He said it was a a sensor type valve at the bottom back of fridge and he would have to order. He never called us, so we went to website and ordered it. Replaced it. It WAS obviously burned out/dicolored. Bracket had to be redone, as it wasn't standard. Didn't work. Ordered new icemaker. Worked like a charm. Video for installing icemaker very helpful. He called a couple weeks later and we already had it fixed.

Was this instruction helpful to you?

Customer:: Ronald from Ft. Myers Beach, FL
Parts Used:: 5304469396
Difficulty Level:: A Bit Difficult
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

arm wouldn't go all the way down and dump ice

Took front off and found the broken spring, got new one and replaced, now works great. Make sure to unplug as the water can come on and flood the freezer.

Was this instruction helpful to you?

Customer:: Clemente from El Paso, TX
Parts Used:: 5303207345
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

On the left top of the door there an opening. I figure if I replace the gasket it would fix the problem. Well it did not.

The repair to the door ok. But the door is still not level.

Was this instruction helpful to you?

Customer:: John from Loxahatchee, FL
Parts Used:: 5304456667
Difficulty Level:: A Bit Difficult
Total Repair Time:: More than 2 hours
Tools:: Nutdriver, Screw drivers, Socket set, Wrench (Adjustable)

ice maker not working and refrigerator too cold

ice maker= replaced overload,microswitch and solenoid water valves.refrigerator=replaced the thermostat.Great price on parts,very fast delivery and parts were a perfect fit.You made the job very easy. John

Was this instruction helpful to you?

All Instructions for the 2539308700