61004752 Kenmore Refrigerator - Instructions

Followed the video instructions and it worked like a charm. Fast service and correct parts.

The repair did not work. The new door strike did not embrace the solenoid.

I had the old spring, and it fit exactly. I also ordered a roll pin, but have no clue as what to do with it. Excellent directions came with the door strike, but nothing with the roll pin.

Was hoping the roll pin would connect the door strike to the solenoid, but did not see how that would work.

The repair was easy following the instructions provided with repai kit. pictures were a little blurry but other wise very helpful.

It was not that hard. I am not totally inept, but also not a mechanice or techie. I have discovered that a lot of repair jobs have a video that shows you how to do things, and seeing it done makes a task doable for me.

First we ordered a new solenoid. . . The little piece that opens and closes whenever you push the button to dispense ice. That definitely needed to be replaced, and it was easy to do. However, that didn't fix the problem, so we looked and looked at the assembly and decided that a spring was missing. We ordered the spring, and when it arrived, we found that it matched exactly one that was already on the assembly. :-) Not the problem. Thirty minutes later we figured it out,. The diagrams at part select were not helpful with this. It was a matter of figuring out how the magnetic weight fit into the assembly. That's all it was! Now we have an extra spring for the future.

The replacements parts were aftermarket parts so I could not simply replace the one piece I needed. I did replace all the original parts with the aftermarket parts and it works perfectly. I wish the design was closer to the original, but it is just as functional. The only problem I ran into was the images on the instruction sheet were difficult to see. The text however did an exceptional job of explaining each step.

shut water off to fridge. remove dust panel from bottom of fridge on back of fridge. remove screws on bracket that holds water valve. remove lines(2) that connect directly to top of water valve (keep track of which line goes to which side on top of valve). cut about 1/2 inch off of those 2 water lines. take those 2 water lines and just insert/push them into their proper location on top of new water valve. reattach bracket. replace dust panel. turn water back on to fridge and check for leaks.

I just lifed the old grate off and layed the new one in.

First I cut the power to the refrigerator. Followed the instructions for removing the door panel. Disconnected the electrical panel to the door controls. replaced the flap only and reassembled. Hate I had to by the solenoid when all I needed was the flap. Ordered the part and had it the next day, very fast shipping. I have used PartSelect for other appliance parts and had good service from them.

easy, followed instructions and installed new parts.

Watched the video and followed the instructions ... time to repair was slightly longer than expected due to the fact that my fridge had wood panels requiring removal. Still, the video was terrific since I am a visual type person.Part Select service was amazing ... ordered one day and the part arrived at my door the very next day. Had the same type of service on a previous repair to replace the ice crushing part of the ice maker. What a company!!! Thanks so much.

Followed video from site. There was one extra wire to disconnect, but it was obvious and not really a surprise considering age of refrigerator. Great assist.

I followed the instructions that came with the kit.

I took my computer down to the kitchen and went play by play with the video of the man doing the repair on the same exact refrigerator that I have. That was the part that was easy because it was explained very well and you could see what he was doing. My only problem was finding the right tools to use.

went on line and ordered new ice maker for this model refrigerator. Received the new part. New icemaker provided video for replacement of ice maker.Used the video showing the removal and replacement of the ice maker to begin the removal process. (must remove one mounting screw, then raise the icemaker up then out to unlatch the fixture.) This took over one hour, then had to remove wiring arness. Instrucions indicated to "squeez" the locking clip holding the connector, it is impossible to see the connector so it was a "feel" process. It turned out that squeesing the connector from the sides, did not work, finally squeezing the locking clip (top to bottom) finally released the connector. Then the installation (per video) reversed the removal procedure and that turned out to be about a two hour task because to align the ice maker when you cannot see the alignment / holding brackets was a very difficullt task. Then when it was finally installed, the one mounting screw, would not align with the previous mounting hole, because the tab on the new one was longer, requiring drilling a new hole to hold the icemaker in place. The hole had to be made using the same (self-tapping) screw, since the space available when the icemaker is installed is very limited. After the mounting hole was partally made, driving the screw the rest of the way had to be done with a ratchet, other then that, everything was just great.