10650782000 Kenmore Refrigerator - Parts

Support wheel assembly with bracket. Kit of 2.

The heater is located at the bottom of the evaporator. The defrost heater heats the evaporator in the defrost mode of operation. The thermostat must be replaced when replacing the defrost heater.

This door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

This is a kickplate, but you may also know it as a grate or a grille. It is a part for your refrigerator. The purpose of the kickplate is to allow air to circulate by flowing through the grates and in...

This part is used to regulate air flow from the freezer compartment to the fresh food compartment. Once the desired temperature is reached, the air diffuser closes.

This screw is sold individually.

This kit comes with the compressor relay, overload and cover.

Once a glass is pressed against the actuator pad it will cause the dispenser to deliver water when activated.

This part is used to hold eggs.

This white icemaker assembly washer is less than an inch long.

This door gasket is used to make an air-tight seal for the cabinet when the door is closed.

Sold Individually - 2 screws needed to mount each handle.