10651752718 Kenmore Refrigerator - Instructions

Pried out the old switch with small screwdriver, popped in the new one and tah-dah!! ..the light came on. While I was at it, I cleaned out the freezer :). I cannot begin to imagine what a repairman would have charged for this.

I was unable to remove the old part so I threaded the new part in front of it. They both fit within the actuator. Done!

Unplugged appliance. Using a small putty knife I moved the switch out far enough to grab it with pliers. Moved wiring to new switch and pushed into place after testing.

After plugging in the new relay to no avail. I replaced the thermostat. That fixed the problem.

Just looked at your video twice and then did it with no problems. Thanks

I did remove the run capacitor of the starthing kit of compressor and another one new. It work fine.

On the left side I unscrewed the screw and replace it with a new one . The right side in had to take s file and file of the rivet. You can use a rivet gun or a metal screw to replaced the clip. Once it is finish open the refrigerator door to see how to line the kick plate into the clip. A piece of cake.

I got the part....I put it in. That's about it.

Well I have to say as a HVAC contractor for 32 years this was a very easy repair for me or anyone who is not a HVAC contractor such as myself. I always like to do a little research on any repairs that I have not performed myself and the instructions and video that was available on this web site was awesome. I did this repair in less them 15 minutes removing parts and reassembly of new part. I did let ice bin sit out for about 10 minutes after I removed ice to de thaw and reach room temperature to keep from cracking frozen plastic parts.The new ice auger drum was a very nice perfect fit and was made of a much better quality plastic then the OEM that was replaced. My mother was very pleased as I did this repair for her at her home and she watched me do the repair and she is 74 years old and she commented that she could have done this repair herself after watching me and she also watched video from this web site after I mentioned it to her. I would highly recommend that if anyone needs parts for there freezer or refrigerator to buy from this web site. The price was much lower then anyplace else I could find and it was shipped to my front door in less then 2 days. I would give this company 5 stars and when I need parts for my refrigerator I will sure stop back here and buy the parts again. Thank You PartSelect and keep up the great job. Ken

I simply followed the video on the partselect web site on my laptop while I did the replacement and it was easy! The online videos are the greatest way to do the repairs.

Followed the DYI Video provided by partselect. Best advice, take a digital pic prior to disasembly, which of course I didn't! My cordless screw driver w/o the tip, is the same size as the screws thus no need for a nut driver.

I watched the installation on your web site and followed your directions and it fell right into place. Absolutely no problems. Thanks.

I followed instructions in the video you provided. No problem at all. Took less than an hour.

I simply watched the repair video and did it! Super easy, needed start device and capacitor. As easy as unplugging the old and adding the new. The video helped and gave me confidence. Wives can fix fridges too! Saved me $2500. Looks like I'll need a new excuse if I want a new fridge.

We used the video out on YouTube to show us how to replace the drum. It made the repair go so fast that we were amazed that two klutzes could do this repair! Remove the screws that hold the housing together. Place the screws in a cup to keep everything together. Remove the spiral unit and the plastic sleeve. The hardest part was removing the auger nut on the assembly. Just remember it is a left hand turn. After that, remember sequence of the blade assembly. The video suggested that you take a picture and that would help remembering the sequence of the blades. Follow the video!