Models > 2533180010A > Parts

2533180010A Kenmore Refrigerator - Parts

Jump to:

13 - 24 of 120
Keep searches simple, eg. "belt" or "pump".
$109.64
Meats, snacks, and other refrigerated foods stay organized in this clear plastic pantry drawer. The sliding pan provides contained storage in the fresh food section, while transparent sides make the c...
In Stock
Order now and your part arrives by Nov 28
If your refrigerator door does not open or close properly, its hinge may need a new bearing. This OEM part provides the pivot surface for the door hinge pin.
In Stock
Order now and your part arrives by Nov 28
This nylon door hinge washer is used to support the refrigerator door as it pivots on the hinge pin and help reduce friction between adjoining parts. A worn, damaged, or missing washer may affect door...
In Stock
Order now and your part arrives by Nov 28
$83.55
Sold individually. Refrigerator Fridge Shelf.. The wire shelf attaches into the refrigerator to provide storage space. This part works with the following brands: Frigidaire, White Westinghouse, Kelv...
In Stock
Order now and your part arrives by Nov 28
This evaporator fan blade is used to move cooled air through the refrigerator or freezer compartments when driven by the fan motor. A cracked, warped, or loose blade may vibrate, strike nearby parts, ...
In Stock
Order now and your part arrives by Nov 28
To maintain the selected cooling level, this refrigerator cold control thermostat senses temperature through an attached sensing tube and switches the compressor on or off as needed. With worn contact...
In Stock
Order now and your part arrives by Nov 28
This white freezer door gasket forms a magnetic seal between the inner door panel and the cabinet, helping keep cold air inside and warm air carrying moisture out. Frost buildup, condensation around t...
In Stock
Order now and your part arrives by Nov 28
This condenser fan motor kit helps your refrigerator release heat. The motor turns the fan blade to move air across the condenser coils and compressor, supporting proper cooling. This is an OEM replac...
In Stock
Order now and your part arrives by Nov 28
Sold individually.
In Stock
Order now and your part arrives by Nov 28
Fasten the refrigerator or freezer hinge bracket to the cabinet structure with this mounting screw. Its 1/4-20 thread and 5/8 inch length suit the specified attachment, and the hex washer head accepts...
In Stock
Order now and your part arrives by Nov 28
Sold individually. NOTE: For 18 cubic feet refrigerator model order part # 240358005 for the shelf and part# 3201150 end caps, quantity 4.
In Stock
Order now and your part arrives by Nov 28
Keep the refrigerator door supported at its lower pivot with this hinge bracket. It helps the door move smoothly and stay aligned with the cabinet for correct closure. If the bracket bends, cracks, or...
In Stock
Order now and your part arrives by Nov 28
13 - 24 of 120