10650503990 Kenmore Refrigerator - Parts

Both bottom door hinges are included in this set.

This kit no longer includes the connectors. It is only the tubing/water reservoir. Note: This tubing requires an adapter coupler (PS369735) to take the tubing from 1/4 inch to 5/16 inch.

This clip is sold individually.

This dispenser door pin comes with the washer.

This kit includes the Relay, Overload and cover. The start relay briefly boosts the compressor, and then shuts off as soon as the motor gets up to speed and the Overload provides added protection f...

Support wheel assembly with bracket. Kit of 2.

This is a kickplate, but you may also know it as a grate or a grille. It is a part for your refrigerator. The purpose of the kickplate is to allow air to circulate by flowing through the grates and in...

This part strips ice from the icemaker mold during the ejection cycle to prevent ice pieces from falling back into the mold.

This part is used to regulate air flow from the freezer compartment to the fresh food compartment. Once the desired temperature is reached, the air diffuser closes.

This door gasket is used to seal the freezer door when closed.

The heater is located at the bottom of the evaporator. The defrost heater heats the evaporator in the defrost mode of operation. The thermostat must be replaced when replacing the defrost heater.