GT1927PVCW International Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- David from Discovery Bay, CA
- Parts Used:
- WP2182124
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
The ice stripper cracked from freezing.
There was three screws to remove to unmout the ice maker, and unplug the wire harness,then two to remove to slip in new stripper. All took about 20 mins.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Lutz, FL
- Parts Used:
- WP61001886
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The old ice pan for the icemaker was broken
I opened the box, unwrapped the new ice pan, gave it a cursory rinse, and put it in the freezer.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Rose from Fort Lauderdale, FL
- Parts Used:
- 61005104
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The original retainer bar was broken and had been duct taped back on.
I took off the old retainer bar and snapped the new one in place. Easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Herbert from McLean, VA
- Parts Used:
- 61005104
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Plastic hooks on the retainer bar sheared off, and the bar fell of the refrigerator door.
This was a simple "clip-on" job. With functioning plasctic hooks, the retaining bar clipped right on the door.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jeane from Milwake, WI
- Parts Used:
- 61005405
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
the brackets on a door shelf had broken off, probably due to too much stuff
inserted bottom brackets, then top ones just slid in; customer service was very helpful is determining correct part to order.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gary from Jenkintown, PA
- Parts Used:
- W11384469
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Lights didn't always come on when was opened
Used a screwdriver to pry loose the old switch, swapped wires to the new switch and pushed it into the opening. Took about 2 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Fred from Watertown, NY
- Parts Used:
- W11384469
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
19 year old light switch broke
Great service. Unpluged old switch and pluged in new one. Works great
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Paul from Hinsdale, IL
- Parts Used:
- W11384469
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door Light switch cracked Mounting
I noticed that the refrigerator was having trouble maintaining temperature. Thought it might be time for new one until I found out that a new frig was $5k to $7K. Just happened to notice that the light switch didn't look quite right (was not sitting sqaure to the door). Once I pressed it it came loose. I then realized the the lights were staying on (50 watts of heating). Replaced the switch and the frig started working like new.
Was this instruction helpful to you?
Thank you for voting!
broken bracket/stoppers for freezer door bin
Broken for over 5 years!!! lost power in a storm freezer empty got model # went to google found partselect very easy to order. Parts came in less than 2 days, popped one in on each side very easy!!! very very happy!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tom from Bethlehem, PA
- Parts Used:
- 67764-1
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Shelf Supports Broke
Took out lower shelf. Unscrewed screws holding two broken shelf supports and removed broken supports. Replaced with new supports and screwed in the screws. Nothing to it.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- George from Los Altos, CA
- Parts Used:
- WP61002308, WP61002307
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Renters overloaded meat drawer & broke drawer rails
Good news/Bad news story. One of your parts view showed the side rails without the drawer rollers another showed the rails with rollers. I ordered the rails expecting that they would come with the rollers attached. They did not so I had to place a second order for two rollers and two screws. As I live in CA, delivery was just a day for first order, but for second I ordered on Sat, delivery was on Tuesday. My complaint was double shipping and handling so total was almost $50.for two very simple items.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- carlos from haverstraw, NY
- Parts Used:
- W11384469
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Replace Bad Switch
Pry old switch and pull out. Disconect two wires. Put two wires on new switch, must be inserted right and connections not loose. Put switch in, making shure wies do not come off and snap in place
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- JONATHAN from ELKINS PARK, PA
- Parts Used:
- W11384469
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Screw drivers
old switch left freezer bulb always-on
Unplug appliance. Socket wrench to unscrew two screws. Module drops down. disconnected two press-on wires by prying off with screwdriver. Removed old switch. Press-fit new switch. Reconnected two wires (color coded). Screwed module back in place. Plug in appliance.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from Bend, OR
- Parts Used:
- 61004466
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken right side tray holder
snaped in new one
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gregory from middle island, NY
- Parts Used:
- W11384469
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
light would work intermitently
removed the 2 screws that held the panel in place, had to reach up and push on locking tabs to lower trhe front of the panel. was able to then push on the locking tab of the switch to release it. removed the wires, replaced them onto the new switch, and snapped the switch into place. the rest was reverse of the uninstall process.
Was this instruction helpful to you?
Thank you for voting!