Models > CTX14CIBNLAA > Instructions

CTX14CIBNLAA Hotpoint Refrigerator - Instructions

Jump to:

All Instructions for the CTX14CIBNLAA
121 - 135 of 287
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Paula from Brookfield, WI
Parts Used:
WR32X10398
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
easy.....shelf broke
Took old shelf out, put new one in. Not rocket science. Really really simple
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Brenda from Troy, MI
Parts Used:
WR32X10398
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
no prblm had hubby do it
same
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joanna from New York, NY
Parts Used:
WR32X10398
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Vegetable pan cover split
it was slowing cracking for a long time, and repairs with duct tape and crazy glue were a futile attempt to avoid the inevitable; a new part altogether! Well a few moments searching your site for the exact piece were all that was needed. With 48 hours of placing the order I had it in my apartment and just slipped it into place! it was a piece of cake!Thank you so much!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Andy from Rapid City, SD
Parts Used:
WR32X10398
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
cracked cover on the crisper drawers
I simply removed the old cover and replaced it with the new one! Fit was perfect. Thanks!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Maria from Miami, FL
Parts Used:
WR32X10398
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The old vegetable pan cover was broken
The new one not only arrived faster than I expected but it was also a lot sturdier, nice shape and the fridge looks cleaner. Also it offers better support for what I store right on it.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Craig from Hanna City, IL
Parts Used:
WR30X10093
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Ice maker would not work.
Removed the Ice maker from the freezer because the light was not on. Disassembled ice maker, found printed circuit board had shorted across two posts because the board was black in that area. Bought new ice maker assembly, installed in less than five minutes, making Ice fine.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Raymond from Toledo, OH
Parts Used:
WR32X10398
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken veg. pan cover.
Set it, and forget it. That easy.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mark J. from Alice, TX
Parts Used:
WR30X10093
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Ice maker quit working, I took it apart and found a broken wire at the thermostat, soldered it back, but apparently it got too hot.
It took longer to remove the ice bucket and frozen food than it did to replace the ice maker. Remove one screw with a 1/4" nut driver, slide outward and remove plug. transfer water tube to new unit. plug it in, slide into rear slots and install one screw. Replace ice bucket and frozen food, shut the door and hear ice falling in about 30 min. Easy job! Great product! THANKS MJS
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robin from Georgetown, TX
Parts Used:
WR30X10093
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Our icemaker quit working.
My husband took the old icemaker out before the new one came in. When the new one arrived, I installed it in less than 10 minutes.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
william from scottsville, VA
Parts Used:
WR32X10398
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
crank vegetable pan cover
put the new one in that was all there was to
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mildred from Fresno, CA
Parts Used:
WR32X10398
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Replaced Vegetable Pan Cover
Thanks for such good service. Everything went better, than I could ever dream of.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dudley from North Little Rock, AR
Parts Used:
WR30X10093
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
new part was substitute/which was some what different and was hard to get tray back in because power cord would not let it
i did every thing according to instructionwhich was simple but it did not cover how to use the extension electrical plug-in and where to put the extra cord so the tray would go back in
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Barbara from Columbus, OH
Parts Used:
WR30X10093
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
We can't seem to get the dripping water stopped when the water fills the ice maker. The large hole in the plastic we covered, but it still drips some. So we may try epoxy. An easy job we thought, but we have this water problem.
A friend had no problem getting the new ice maker in. But then the problems started. The ice maker works great. But when the water fills the ice maker it squirts water onto the side of the freezer and ice sickles form. So we watched and decided the hole was too large so used a piece of plastic. That helped to cover the hole. But some water is still entering the freezer and not all going to the ice maker. The only other thing we can think to try is to use epoxy to try to close that place. A simple job has turned into a big headache. I wish they made the ice maker like the original one.
2 of 7 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joyce from Bellevue, KY
Parts Used:
WR32X10398
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken refrigerator tray
I'm not at all techie, but your site made it easy for me to find the part I needed. The part arrived within 2 days, and walla I installed and all is good.

Thanks, I only wish every internet search was this easy.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Deborah K from Fremont, OH
Parts Used:
WR32X10398
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tray Holding Vegetable Bins Split In Center
All I had to do was remove what I had on the shelf, remove the bins, replace the shelf and slide the bins back in, replace what I had on the shelf and close the door. I am so happy now when I open the refrigerator door and the new (unbroken) shelf has replaced that old broken one.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the CTX14CIBNLAA
121 - 135 of 287