Models > CSF24DBD > Instructions

CSF24DBD Hotpoint Refrigerator - Instructions

Jump to:

All Instructions for the CSF24DBD
121 - 135 of 161
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Susan from Chevy Chase, MD
Parts Used:
WR2X4901
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Refrigerator door didn't close without a big push.
Took door off. Replaced two cams at bottom of door, referencing those on the bottom of the freezer door. Also followed a video on the net. Worked like a jewel!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Carol J from Alexandria, KY
Parts Used:
WR2X4901
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Door would not close properly at the last few inches, now it closes good at this time but now need to be raised up to the 5/8 inch as the book says, haven't done that yet
the door closing cam works fine.
Was this instruction helpful to you?
Thank you for voting!
Customer:
JOHN E from BRIDGEWATER, NJ
Parts Used:
WR49X392
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Heater not working caused the freezer to freeze up.
Took out old heater and put new one in. That was it.
Was this instruction helpful to you?
Thank you for voting!
Customer:
james from tryon, NC
Parts Used:
WR2X4901
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
the cam broke because of weight and age
I watched the video on the webpage and did as he did. it was quick and easy. didn't realize the importance of this little part until it broke
Was this instruction helpful to you?
Thank you for voting!
Customer:
Philip from Charlottesville, VA
Parts Used:
WR2X4901
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
The door closing cam disintegrated and had to lift door to close it
Ther was a video on how to repalce this part on your web site. Describing what tools were needed saved me running back and forth to my tool box. I followed the directions given in the video and repair was completed in 1/2 hour. That included meremoving then cleaning and replacing the sheves in the door. And by the way, the part was shipped the same day I ordered it and arrived on my doorstep noon the following day.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Donna from Lombard, IL
Parts Used:
WR72X207, WR72X206
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Broken side rails
According to instructions, removed screws from broken side rails, installed new slide rails. The woman that helped with the order over the phone was VERY helpful in determining the correct parts.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Steve from Baytown, TX
Parts Used:
WR2X4901
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Socket set
Plastic cams had worn out
Took the hinge of the top and lifted door of the bottom. Replaced cams and reinstalled
Was this instruction helpful to you?
Thank you for voting!
Customer:
Martin from Yakima, WA
Parts Used:
WR2X4901
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set, Wrench (Adjustable)
door was not closing properly
watched the video on changing the cam and then did the repair as per the instructions. the job was easy and now the door works as it should. that saved me lots of money by doing it myself. thanks, Martin.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Don from Dayton, OR
Parts Used:
WR72X206
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Broken slide rail
Removed food from shelf, removed shelf, removed slide. installed new slide. Perfect fit
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lawrence from Cape Coral, FL
Parts Used:
WR72X207
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Left side rail was completely detroyed.
Real simple actually.... tracked down the model number. Found and ordered the needed part on partselect.... it arrived OVERNIGHT (scary!). Remove the pieces of the old bracket that were laying in the bottom of the fridge. Remove the 2 mounting screws... install the new slide rail with same screws. Re-install drawer. DONE.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Paula from Woodville, GA
Parts Used:
WR72X206
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
right slide rail for shelf was broken in front
I loosened to Philip's head screws and removed the broken glide, then replaced the new glide, lining up the holes, and then screwing in the two screws from the old glide. This solved the problem- a quick fix. Thank you!!!!
Was this instruction helpful to you?
Thank you for voting!
Customer:
PETE from LAKE FOREST PARK, WA
Parts Used:
WR2X4901
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
door would not close on first touch.
I ordered a door closing cam (4320595) to start with and then relized I needed Bottom Hinge Assembly which I ordered#4326874. I had no problem installing. I have returned for credit the door closing cam. I HAD NO TROUBLE INSTALLING THE BOTTOM HINGE ASSEMBLY. ONLY TOOK 10 OR 15 MINUTES. I am a retired building contactor and hade all the toos necessary.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from yorkville, IL
Parts Used:
WR2X4901
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Door cam broke
Followed the instruction video. The price was high for a plastic part the size of a quarter.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Simi Valley, CA
Parts Used:
WR72X207
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Tray and drawer slides
This is the third time I have used parts select to fix an appliance. I have saved thousands now in replacement costs and certainly hundreds in repair costs. They had exactly what I needed and the online diagrams made it easy to identify the parts I needed and install them too.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Pauline from Traverse City, MI
Parts Used:
WR72X206
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
The drawer slide rail broke
Took out the broken one and replaced it with the new one.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the CSF24DBD
121 - 135 of 161