GRS22PRBW0 Gibson Refrigerator - Instructions

Removed old pan and cleaned all surfaces and reinstalled new pan.

Put the end caps on the metal bar and put it on the freezer door and it snapped right in.

Very easy to do in less then 4 minutes to do both shelves.

Thank you very much.

Removed everything from the door. Removed all the screws from the door and took off the door panel. Laid panel out and fit gasket on it and then put it back on starting at the top. Used hair dryer to remove kinks from gasket from shipping. Everything went well. I left the door attached to the refigerator. There would be no way in my opinion to put the gasket on by just loosening the screws as the instructions stated. Its just too hard to get the gasket in that way. But taking the inside door panel; off worked well.

I simply removed 4 screws holding the casing and then 2 more holding the timer. It was very easy. I then replaced the timer by unplugging and plugged the new one in. I replaced all the screws and the job was done. Less than 30 minutes. I was very impressed with the shipping time. When I ordered the part, I had it the next day.

Refrigerator started frosting up and running all the time.I'd defrost it and it would frost up again in about a week.The timer seems to be work so I just guest it mite be the Defrost Thermostat.I removed the duck in the center and back panel in the freezer compartment defrosted it and switched Thermostats and replaced panel and duck, going to lower compartment of the refrigerator.So far it seems to be working a little more time while tell.

Removed the broken drawer and Sfelf. Removed drawer front and attached it to new drawer part, Removed parts from shel fand reaattached to new shelf and installed both new parts. Couldn't have been any easier. Parts were great.

Replaced defrost timer & thermostat.

Ordered a new defroster timer and replace old one. It works just fine. A $35 repair vs a $500 new appliance.
Cool.
GWE

I removed the old drawer. Next I popped off the drawer front and threw away the rest. The drawer front then snapped neatly onto the new storage drawer. I then slid the newly assembled drawer into place.

First of all, I both called and e-mailed PartSelect, to praise them for my overall experience. It's a 17+ year-old refrigerator, they had the parts in stock, I ordered them, and received them the next day; less than 24 hours later. WOW! The install was a bit tricky, just trying to get the old drawer fronts removed, to put onto the new drawers. I was careful to not manhandle them too much, so as not to break them. They were just kind of gunked up with debris, from the many years of use. I used the screwdriver blade to gently pry the drawer front loose, from the old drawer. Once loose, the reinstall was really quite simple. Thanx!

The old drawer front needed to be carefully pried off with a plastic bladed screwdriver. The front simply slides onto the new drawer and is tapped into place with a rubber mallet.

Most impressive was the literally one-day standard (not overnight) delivery!

Took the front panel off the old drawer and put it on the new drawer.

couldn't have been easier, even an old lady (like me) can do it with no problem.

I'm a widow and thought I'd need my son's help to fix this. I did not. I pulled out & emptied the broken lower drawer, tapped the plastic cover off against the countertop, washed the plastic cover, snapped it into the new drawer, filled it & put it into the fridge. 7 Minutes, tops - most of that time spent emptying the old drawer. I can't believe I waited as long as I did to fix this drawer; it was ridiculously easy.

Got the new drawers, removed the drawer fronts from the old drawers, slid the fronts onto the new drawers and installed them. Why did we wait years to fix this simple problem?

Traced issue to defrost timer ( burned compressor & element contacts). This unit is mounted next to the temperature adjustment control in the refridgerator area - right in front. Removal of plastic cover provided easy access to the timer. Unit unscrews from the mounting then unplugs. Installation is reverse of removal.