Models > 36211XBMFRWW > Parts

36211XBMFRWW General Electric Refrigerator - Parts

Jump to:

1 - 12 of 117
Keep searches simple, eg. "belt" or "pump".
The evaporator fan motor circulates air over the cooling coils from inside the freezer compartment. If your refrigerator is running warmer than usual, this motor may need replacement. The OEM motor is...
In Stock
Order now and your part arrives by Nov 21
Measuring approximately 1 inch in diameter and helps reduce vibration transferred from the running motor, this red evaporator fan grommet cushions the fan motor at its contact with the mounting bracke...
In Stock
Order now and your part arrives by Nov 21
The end cap is used to hold the retainer bar on the fridge door in place. This genuine OEM part is made of white plastic and can be used for either the left or righthand side of the bar. The retainer ...
In Stock
Order now and your part arrives by Nov 21
This grommet is found on both the front and back of the fan motor assembly for the condenser and the evaporator in your fridge. It is used to provide a buffer between the fan motor and the mounting br...
In Stock
Order now and your part arrives by Nov 21
This 40-Watt light bulb is sold individually. It is specially designed to withstand extreme temperatures, so this bulb is compatible with a variety of appliance types including refrigerators, ranges,...
In Stock
Order now and your part arrives by Nov 21
The light switch in your refrigerator is used to turn the light on and off when the fridge door opens or closes. This is considered a closed switch, which means that when the fridge door depresses the...
In Stock
Order now and your part arrives by Nov 21
This OEM compression ring is used to hold the evaporator fan motor in place. Signs that you may need to replace the compression ring are if the fan is noisy, or your fridge or freezer are too warm. We...
In Stock
Order now and your part arrives by Nov 21
$15.26
This genuine OEM replacement part is a bumper for your refrigerator. The bumper is made of orange rubber and measures less than half an inch in diameter. The bumper is used to prevent the fan motor fr...
In Stock
Order now and your part arrives by Nov 21
This replacement door shelf bar helps keep items secure on your GE refrigerator’s door shelves. It’s made from sturdy plastic and installs easily without tools. A simple solution to restore shelf supp...
In Stock
Order now and your part arrives by Nov 21
To support steady compressor operation, this refrigerator run capacitor provides the electrical phase shift needed for the compressor motor to run properly as the cooling system operates. Humming, dif...
In Stock
Order now and your part arrives by Nov 21
This is a replacement shelf bar end cap. The end cap connects to the shelf bar on either side, and then snaps into position on the freezer door. This will allow you to store items in the freezer door....
In Stock
Order now and your part arrives by Nov 21
This fan motor circulates the air through the refrigerator grille and cools the compressor and condenser coils. It also helps to evaporate extra water in the drain pan.
In Stock
Order now and your part arrives by Nov 21
1 - 12 of 117