Models > TPX24BIBEWW > Instructions

TPX24BIBEWW General Electric Refrigerator - Instructions

Jump to:

All Instructions for the TPX24BIBEWW
121 - 135 of 225
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Sherry from Heber Springs, AR
Parts Used:
WR30X10093
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Ice maker wasn't working
Watched video on website then removed old ice maker. New one went in without any problems. Working great. I am a 60 year old woman and had never done anything like this but so easy. Husband scared now, doesn't know what project I will take on next.
1 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Roscoe G from ROCHESTER, NY
Parts Used:
40A15
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Light burnt out.
Turned the wire protector to the side. Turned out the old bulb and replaced it with the new. Turned the wire protector back in place and I'm like new.
2 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Barbara from Woodston, KS
Parts Used:
WR30X10093
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Ice Maker quit working
The instruction video was great, mine was easy than even the video showed it to be. I changed it out in less than 15 minutes and it works great. The niocve things I didn't have to wait for a repairman or my husband to fix the problem.
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Joseph from Sayville, NY
Parts Used:
WR30X10093
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
No Ice
REplaced old icemaker with a new one. Install simple, However that was not the problem. I then replaced the water valve. Still no ice. I check the electric connection was OK. THe problem was the elbow fitting on the top back of the refrigerater leading to the icemaker was blocked with ice.Cleared it and turned water faucet up all the way. Ice maker worked.
0 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from Atlanta, GA
Parts Used:
WR71X2638
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken shelf frame.
Placed the glass shelf in the new shelf frame and the frame in the refrigerator.

I was unable to positively identify the replacement shelf frame on the GE web site. Part Select's exploded view made it a piece of cake!
1 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Salvatore from New City, NY
Parts Used:
WR30X10093
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Screw drivers
does not fill ice maker this was not original problem
install icemaker water was allways delivered to previous unit water is not being delivered to icemaker still having difficulty
2 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Allen from Santa Fe, NM
Parts Used:
WR30X10093
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
Icemaker leaking water
I had to defrost the freezer to free the icemaker. After that the installation was plug and play with two small exceptions: 1) I had to file down the width of the left hand tine of the old stripper so that it would fit the new icemaker, and 2) the motor housing of the new icemaker was slightly wider than the old one. It fit, but just barely. But I'm back in the ice again, no dripping water, all is good.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Matthew J from White Plains, NY
Parts Used:
WR30X10093
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Wrench (Adjustable), Wrench set
Broken ice maker replacement
Installing the actual ice maker was quite easy. What takes most of the time is preparing the freezer for the install. Need to remove all shelving, (and the door) to gain access to the unit. The ice maker is simple to install once access is achieved. Putting everything back together takes some time.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Oconomowoc, WI
Parts Used:
WR51X10055
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Pliers, Screw drivers
Refrigerator not staying cold.
Remove items from Freezer, remove panel and defrost condensor coils (most time consuming part of the job). Defrost Heater is held in with two screws and two electrical connectors (remove by hand or with pliers). It's worth replacing the Defrost theromostat and Defrost heater at the same time. Only cost $60 for the two parts and will ensure you have the fix. Use the "outdoor" wire nuts when splicing in the Defrost thermostat, that will ensure you don't have any issues with moisture at the splice. When defrosting the condensor coils, soak up water as the catch tray won't hold the volume of water that will melt off the coils.
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from Raven, VA
Parts Used:
WR51X10055
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
Freezer icing and frig warm
I replaced the Defrost Timer & Defrost Thermostat previously only to find that the freezer was still freezing up. It was obvious that the Defrost heater was bad and I ordered it. I had ignored Parts Select reccommendations on my first order otherwise it would have been less than 30 minutes to complete all of the repairs. It took longer to defrost the freezer coils than the actual repairs took. I followed the published installation from Parts Select and now my 10 year old side by side is working like a new appliance. Thanks Parts Select for the fast shipping and accurate replacement instructions. Jim from Virginia, you get 10 stars from me!
Was this instruction helpful to you?
Thank you for voting!
Customer:
James from Dayton, IN
Parts Used:
WR50X122
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Freezer not freezing and refridge not cooling right.
First Unplug! then Removed shelves light bulb in freezer removed back panel and themostat right on top pulled off cut wires and butted up to new wires then puched clip back on and replaced everything. Works like a charm now. just as though it was a new one.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Patricia from Norwood, NC
Parts Used:
WR30X10093
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
No problems.
Took out the old, replaced with the new. Needed second person to hold the flash light. That is the secret to get it plugged in and secured.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from Santa Fe, NM
Parts Used:
WR29X5171
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Ice maker kept on making ice
I ordered a new micro switch that was activated by the high ice lever. Once the switch was replaced the ice maker cut off as it should have and stopped producing too much ice. YHis job was of moderate skill level, the most challenging was replacing a spring that popped out then reassembling the unit.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Paul from strongsville, OH
Parts Used:
WR51X10055
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Refridgerator and freezer getting warm.
First replaced the temp sensor and thermostat, no results. Replaced heating element (looked chared inside the clear tube) and it worked. Heating element is just a plug in connection as comparewd to sensor and thermostat which is splicing in wire connections. Defrosting takes the longest time.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Diana from San Ramon, CA
Parts Used:
WR51X10055
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Refrigerator was not as cold as usual and freezer was not keeping ice cream solid.
First had to diagnose the problem. From reading others stories, figured it would be the timer, thermostat or heater. First removed the back panel of the freezer. There are 3 screws at top that will need a phillips screw driver and 2 hexagon nuts at bottom. The defrost heater is at the very bottom. If the glass is black, it's burnt out. Got that clue from others. Had to shop for fresh produce and meats as the days went. Put towels at the bottom of freezer over the drain hole so it doesn't overflow while defrosting it the first time. There will be lots of water if the outside of the panel that covers the coils has a sheet of ice on it as well from the build up. Used hair dryer a couple of times every 2 days until the part arrived to avoid a big build up of ice again. Once the part arrived, instead of standing there and defrosting the coils, it was easier to empty the frigerator contents into a cooler. The freezer contents went into outside freezer, probably would be ok in cooler for a day. Unplug and let it defrost overnight. Had plenty of time to plan this because it took at least 5 days to receive the part. Unscrew the bracket, remove the plug-in from both ends of defrost heater/bracket assembly and lift out. Plug in new one, screw in place. You're done. Now hubby can have his coolers back and go fishing! Good as new. Fridge is 38-40 degrees and ice cubes are solid within a few hours. Darn, I won't be getting that French door fridge for awhile, I guess.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the TPX24BIBEWW
121 - 135 of 225