Models > PSG25MCMHCBB > Instructions

PSG25MCMHCBB General Electric Refrigerator - Instructions

Jump to:

All Instructions for the PSG25MCMHCBB
106 - 120 of 363
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Steve from Littleton, CO
Parts Used:
WR23X31507
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The Light Would Not Go On
Knew the switch was bad. Researched on the internet how to fix. Used a steak knife to pop the old one out, changed the contacts to the new switch and popped it back in. It took longer to open the box than it did to replace the switch. And the part arrived 2 days after I ordered it.
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Cyndy from Rancho Cucamonga, CA
Parts Used:
WR23X31507
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
I dropped one of the trays and it hit the light switch and broke off!
It was so darn easy! Took less then 10 minutes to fix. Self explanatory no instructions needed! Very cool!
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Gerald from Shelton, CT
Parts Used:
WR82X10103
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
brand new ge refrigerator delivered with broken access cover. cost 6.95 so i repaced it myself.
removed 6 screws and repaced cover.
4 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
john from auburndale, FL
Parts Used:
WR71X10764
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
broken door bin
looked up the part on your site which was very quick and easy. Ordered the part and it came quickly and my installation was just as quick. Greatful for your web site Regards John
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert J. from Darlington, SC
Parts Used:
WR71X10764
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Broken shelf insert
Snapped it into place. Nothing to it!
2 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Debra from Norfolk, VA
Parts Used:
WR71X10764
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Shelf broke
I just snapped in the new side to the shelf ...very simple and easy:-)
3 of 6 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ned from Goleta, CA
Parts Used:
WR74X10270
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Grill broke removing refer for flooring
Easy order, fast delivery, two screws, done.
10 of 27 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Loretta from Florence, KY
Parts Used:
WR17X11481
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Missing rack
Opened the refrigerator door and the wine/beverage rack locks into place in the two slots.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Rick from Vacaville, CA
Parts Used:
WR12X10626
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
broken shelf face
+The shelf face has little plastic locator clips that snapped off. the shelf face just comes off with a light lift of these two clips and a slight upward pull then lift up and off. The new one slips on with the top slipping onto the top rail of shelf, then push the bottom tow clips over the bottom rail of the shelf. There you have it smooth as glass.
4 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael from PALMYRA, VA
Parts Used:
WR23X31507
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
The switch was loose ( no spring). The lights did not work.
Unplug the refrigerator. Gently pry old switch out with screw driver. Move wires to connector on new switch with needle nose pliers. Pop it back into the hole. Plug back in. Peek inside to see the lights working.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
DeMarcus from Garrison, TX
Parts Used:
WR50X10068, WR55X10025
Difficulty Level:
Very Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Wasn't getting cold and wouldn't defrost
Remove one nut top of ice box cut wire and replace temperature sensor in freezer part remove two nuts on back panel and cut wire and add temperature sensor then remove defrost thermostat cut orange and pink wire and twist together new sensor and tape up and one more temperature sensor add bottom of freezer cut and replace and tape up all wire and replace back cover simple easy job
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Barbara from MOUNT VERNON, IL
Parts Used:
WR71X10973
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
The bottom was cracked
Just replaced it with new part
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lisa from MATTAPOISETT, MA
Parts Used:
WR71X10764
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Clear front plastic cracked
We were able to easily remove the existing clear section of the door shelves and replace them with the part we ordered from partselect.com. We needed to contact customer service during the order – they were efficient and friendly. The parts came quickly and were easily installed.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Nina from SANTA MARIA, CA
Parts Used:
WR74X10270
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers, Socket set
Broken Kickplate
Easy to install. Looking at the side of the existing kickplate that was not broken helped to know how it should look when installed. New part worked great!
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Dan from COLUMBIA, SC
Parts Used:
WR55X10025
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Socket set
Refrigerator not getting cold
Replaced Temperature Sensor and now it is getting cold.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the PSG25MCMHCBB
106 - 120 of 363