Models > PFSS6PKWASS > Instructions

PFSS6PKWASS General Electric Refrigerator - Instructions

Jump to:

All Instructions for the PFSS6PKWASS
76 - 90 of 123
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
donnie from metairie, LA
Parts Used:
MWFP
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
replaced filter
none required
Was this instruction helpful to you?
Thank you for voting!
Customer:
david from bridge city, TX
Parts Used:
WR13X10516, WR02X12643
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
on the french doors my granddaughter kept turning the inner seal bar when the door was open and when we went to close it it was in the wrong position and eventually the upper hinge broke
I took a small straight screw driver and popped the cap case off, removed old hinge and installed new hinge and snapped the cap back in place.. took all of 30 seconds
Was this instruction helpful to you?
Thank you for voting!
Customer:
David from San Antonio, TX
Parts Used:
MWFP
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Poor water and ice taste, filter a few years old.
Very simple, I followed instructions sent with the filter. Twisted old filter clockwise 1/4 turn to remove. Filled new filter with water, lined up arrow on filter to arrow on refrigerator, and then turned 1/4 turn counterclockwise. Filter raised and seated itself. Wiped few drops of water from refrigerator shelf.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jason from Urbandale, IA
Parts Used:
WR29X10097, WR30X10097
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Ice Bucket cracked, Ice Maker leaking and making noise
I unplugged the fridge. I removed the old ice bucket, removed the screw on the cover for the ice maker cord, unplugged the cord, pushed in the clip that holds in the ice maker, pulled down and slid the ice maker towards me. It came right out. I replaced everything in reverse order. It all works great. I did verify my main control bord was at an updated release level before replacing the Ice Maker. Some of the sites I found said that both need to be replaced do not meet the recomended rev level. I don't remember what they were, I wasn't expecting to submit any instructions.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sharol from Culdesac, ID
Parts Used:
WR02X12651
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Spring broke
Installed new spring pin and spring. Took only 2-3 minutes. It was more difficult to get the correct part since the spring pin was the only number listed in the part diagram and I actually needed the spring and had to call customer service to get the correct part number.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from Waynesboro, PA
Parts Used:
MWFP
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
replace water filter
Easy, with included video and instructions
Was this instruction helpful to you?
Thank you for voting!
Customer:
GREGORY from SACRAMENTO, CA
Parts Used:
MWFP
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Change Filter
My 14 year old Son
Was this instruction helpful to you?
Thank you for voting!
Customer:
Irene from Tigard, OR
Parts Used:
MWFP
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Ice and Water Filter needed replacement
It was easy and fast, like changing a light bulb. The directions were clear and easy to follow. Thank you.
Was this instruction helpful to you?
Thank you for voting!
Customer:
terry from fort worth, TX
Parts Used:
MWFP
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
did not need adapter
exactly as the instructions.......never did see anything about replacing the adapter...therefore i did not
Was this instruction helpful to you?
Thank you for voting!
Customer:
Linda from Tampa, FL
Parts Used:
WR30X10097
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
the icemaker was making noise
I figured out how the whole thing worked by taking it apart. After several attempts to clear the passageways of ice that were getting stuck, I had a repairman out to take a look. He wanted $350 for the repair and replacement. I paid the $89 truck charge and sent him on the way. (He did take five minutes and sort of fix the french door close mechanism which also is failing, but that's another issue.)I ordered the part and plugged it in to the receptacle in the ice compartment. Savings: about $150. Now I have ice! Thanks Part select!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Colby from Midlothian, TX
Parts Used:
WR32X10668
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Drawer was left open when doors were shut. Broke one of the pins that holds the drawer cover in place
Removed the clear plexiglass window. Cleaned it with soap and warm water preparing it to be installed into the new Drawer Cover Frame. Re-installed the Plexiglass into the new frame and mounted cover assembly to its fixing place.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Carole from Sunrise, FL
Parts Used:
WR32X10662
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
crack by the middle of vegi drwaer
easy slide out and put new one
Was this instruction helpful to you?
Thank you for voting!
Customer:
Thomas from Pickerington, OH
Parts Used:
WR29X10097
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Ice Bucket housing had broken
Simply removed broken part and replaced with new one.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from Arlington Heights, IL
Parts Used:
WR32X10666
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken pantry flip lid cover
1.) Remove produce drawers above deli drawer. (2). Place right side pin of deli drawer cover into hole. Note that hole on right side has a raised lip so you need to insert this side first. (3). Sprayed PAM cooking spray on deli drawer near hole on left side. (4). Slide left side pin on deli cover into hole on left side. 5 minute job, quite easy. Use cooking spray to lubricate the pin so you don't have to force it into hole on left side and risk breaking it.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Randell from Rancho Cucamonga, CA
Parts Used:
MWFP
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Filter needed replacing
Very easy, unscrew and re-screw new filter in..
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the PFSS6PKWASS
76 - 90 of 123