Models > PFSS6SKXBSS > Instructions

PFSS6SKXBSS General Electric Refrigerator - Instructions

Jump to:

All Instructions for the PFSS6SKXBSS
91 - 105 of 119
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Irene from Tigard, OR
Parts Used:
MWFP
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Ice and Water Filter needed replacement
It was easy and fast, like changing a light bulb. The directions were clear and easy to follow. Thank you.
Was this instruction helpful to you?
Thank you for voting!
Customer:
terry from fort worth, TX
Parts Used:
MWFP
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
did not need adapter
exactly as the instructions.......never did see anything about replacing the adapter...therefore i did not
Was this instruction helpful to you?
Thank you for voting!
Customer:
Linda from Tampa, FL
Parts Used:
WR30X10097
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
the icemaker was making noise
I figured out how the whole thing worked by taking it apart. After several attempts to clear the passageways of ice that were getting stuck, I had a repairman out to take a look. He wanted $350 for the repair and replacement. I paid the $89 truck charge and sent him on the way. (He did take five minutes and sort of fix the french door close mechanism which also is failing, but that's another issue.)I ordered the part and plugged it in to the receptacle in the ice compartment. Savings: about $150. Now I have ice! Thanks Part select!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Colby from Midlothian, TX
Parts Used:
WR32X10668
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Drawer was left open when doors were shut. Broke one of the pins that holds the drawer cover in place
Removed the clear plexiglass window. Cleaned it with soap and warm water preparing it to be installed into the new Drawer Cover Frame. Re-installed the Plexiglass into the new frame and mounted cover assembly to its fixing place.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Carole from Sunrise, FL
Parts Used:
WR32X10662
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
crack by the middle of vegi drwaer
easy slide out and put new one
Was this instruction helpful to you?
Thank you for voting!
Customer:
Thomas from Pickerington, OH
Parts Used:
WR29X10097
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Ice Bucket housing had broken
Simply removed broken part and replaced with new one.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert from Arlington Heights, IL
Parts Used:
WR32X10666
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broken pantry flip lid cover
1.) Remove produce drawers above deli drawer. (2). Place right side pin of deli drawer cover into hole. Note that hole on right side has a raised lip so you need to insert this side first. (3). Sprayed PAM cooking spray on deli drawer near hole on left side. (4). Slide left side pin on deli cover into hole on left side. 5 minute job, quite easy. Use cooking spray to lubricate the pin so you don't have to force it into hole on left side and risk breaking it.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Randell from Rancho Cucamonga, CA
Parts Used:
MWFP
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Filter needed replacing
Very easy, unscrew and re-screw new filter in..
Was this instruction helpful to you?
Thank you for voting!
Customer:
Peter from Homer Glen, IL
Parts Used:
WR23X10582
Difficulty Level:
Really Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
Evaporator freeze up
Pulled off the evaporator cover and replaced the Temp sensor.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Frank from San Diego, CA
Parts Used:
WR32X10666
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Flip lid was broken trying to force it open.
I removed the vegetable bins as well as the side panels holding the flip panel. I then tilted the left panel and slipped the side pins in their respective holes. This took some time as it was difficult getting the housing under the drawers to fit back into the side ledges. I was ready to call for a repair serviceman but was proud when the job was completed.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the PFSS6SKXBSS
91 - 105 of 119