PFSF6PKXCWW General Electric Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Irene from Tigard, OR
- Parts Used:
- MWFP
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Ice and Water Filter needed replacement
It was easy and fast, like changing a light bulb. The directions were clear and easy to follow. Thank you.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Peter from Homer Glen, IL
- Parts Used:
- WR23X10582
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers
Evaporator freeze up
Pulled off the evaporator cover and replaced the Temp sensor.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Randell from Rancho Cucamonga, CA
- Parts Used:
- MWFP
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Filter needed replacing
Very easy, unscrew and re-screw new filter in..
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Frank from San Diego, CA
- Parts Used:
- WR32X10666
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Flip lid was broken trying to force it open.
I removed the vegetable bins as well as the side panels holding the flip panel. I then tilted the left panel and slipped the side pins in their respective holes. This took some time as it was difficult getting the housing under the drawers to fit back into the side ledges. I was ready to call for a repair serviceman but was proud when the job was completed.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- DENISE from Simpsonville, SC
- Parts Used:
- WR32X10668
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Pin broke off of pantry cover frame
Appreciated others comments before I had to repair mine! Took me a bit to get clear part out of white frame (with screwdriver). Popped clear part into new white frame, but then had to push on some parts to really get it to snap fully in. Then it was simple to put the one pin into the hole on the fridge and bend the frame slightly for the other pin to go in. Thrilled to have it look great and work correctly.
Was this instruction helpful to you?
Thank you for voting!