Models > GSL22JFZCLB > Parts

GSL22JFZCLB General Electric Refrigerator - Parts

Jump to:

1 - 12 of 231
Keep searches simple, eg. "belt" or "pump".
Keep water and ice properly filtered with this updated refrigerator filter. It installs in the upper right corner of select refrigerator models. Turn the old filter left to remove it, then align the a...
In Stock
Order now and your part arrives by Nov 22
If the ice maker in your fridge is noisy or no longer dispensing ice, there may be an issue with the auger in the ice bucket. The auger works by spinning to pull and dispense ice from the bin down the...
In Stock
Order now and your part arrives by Nov 22
The main control board relies on this thermistor, or temperature sensor, for readings from inside the refrigerator or freezer. Those readings guide cooling decisions, including when the compressor and...
In Stock
Order now and your part arrives by Nov 22
A leak, a dispenser that will not flow, or an ice maker that will not make or dispense ice can point to the refrigerator water inlet valve. This OEM assembly controls water flow and includes a guard. ...
In Stock
Order now and your part arrives by Nov 22
This refrigerator ice maker assembly automatically freezes water and releases crescent-shaped ice cubes into the storage bin. It replaces an existing ice maker that has stopped cycling, fails to relea...
In Stock
Order now and your part arrives by Nov 22
This dual heater kit replaces the single heater. It's redesigned to use two heating elements for a better defrost cycle.
In Stock
Order now and your part arrives by Nov 22
Warm, moist air stays out of the ice chute when this refrigerator dispenser door flapper closes against the opening. The flap opens during ice dispensing, letting cubes pass through, then returns to f...
In Stock
Order now and your part arrives by Nov 22
This ice dispenser solenoid is used to move the linkage that opens the ice chute door when dispensing is activated. When power is released, the mechanism allows the flap to close and limit warm air en...
In Stock
Order now and your part arrives by Nov 22
The bearing slide is a small plastic piece found in your refrigerator that helps the crisper drawers to move smoothly on the rails. This is a genuine OEM part, and they are sold individually. There ar...
In Stock
Order now and your part arrives by Nov 22
$37.35
This authentic OEM part is a clear plastic dairy door for your refrigerator. It is found on the interior of the fridge door and rotates open and closed so that you can access the dairy compartment. If...
In Stock
Order now and your part arrives by Nov 22
The vegetable drawer, also known as a crisper drawer, is used to keep fresh produce at the optimal temperature and humidity level. These drawers can become damaged over time from regular wear and tear...
In Stock
Order now and your part arrives by Nov 22
After the ice dispenser is used, this recess door spring brings the chute door or dispenser lever back to its resting position. The spring is housed behind the control panel in the water and ice dispe...
In Stock
Order now and your part arrives by Nov 22
1 - 12 of 231