Models > GBS22KBSCBB > Instructions

GBS22KBSCBB General Electric Refrigerator - Instructions

Jump to:

All Instructions for the GBS22KBSCBB
121 - 135 of 337
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Robin from Chesapeake, VA
Parts Used:
WR55X10942C
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
Frost on back panel and frig and freezer would get warm.
I wouldn't have had a clue without your video. After the part was delivered, which was only in two days, I watched the video. The man explained everything perfectly, making our "fix" a breeze. It was great, I stood over my husband's shoulder, while he sat on the floor and told him what to do step by step. It couldn't have been easier. You guys are awesome!
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
lisa from houston, TX
Parts Used:
WR55X10942C
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Refrigerator kept turning off and on
I easily removed the screws and then removed the board and took a picture so I would remember how to re-connect it. It was really easy and now my refrigerator is working great. If I can do it anyone can do it. My husband was amazed that I did it all by myself.
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Les from Sierra Vista, AZ
Parts Used:
WR55X10942C
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Fridge failed to cool
Moved fridge out from wall. Unplugged. Removed circuitboard cover 6 screws?). Replaced circuit board (showed burn spots on back side). Replaced cover and plugged back in.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Paul from Newbury, OH
Parts Used:
WR55X10942C
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Freezer fan made a howling sound
Used 1/4 nut driver and drill to take off acc pnl. The repair amounted to unplugging several connectors, removing the old motherboard, installing the new board and reconnecting the wires. this solved the problem and the whole appliance seems to run better.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
larry from divernon, IL
Parts Used:
WR55X10942C
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
the refrigerator quit completely
I pulled the fridge out away from the wall, unplugged fridge, and found the panel that the main control board was behind. after comparing old board with the new i unpluged all of the connections unscrewed four screws and installed new board in reverse order. very simple..
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Anthony from Floral Park, NY
Parts Used:
WR55X10942C
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
first water on door would shut off then refridgerator shut down completly unpluged and pluged back in and it made clicking noise the light always stayed on
was not home when part came so my wife installed it enough said
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Alicia from Nutley, NJ
Parts Used:
WR55X10942C
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
freezer and frige stopped getting cold. had repairman come to check . thought it might be the board but wasn't sure (not very helpful). afer replacing board it took o time to get cold. no problem since.
very easy repair, simple exchange
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Terry from Delbarton, WV
Parts Used:
WR55X10942C
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Clicking noise while trying to turn on,would not turn on.
I checked the problems others were having to see if they had simular ones. They were having the same clicking noise I was having. My refrigerator would not turn on. Clicking noise but would not start. They replaced the motherboard. I searched the internet for prices. Part select was about $30.00 cheaper that the other stores. I ordered from part select. Nice helpful people to deal with. I installed the part in about 5 minutes, very easy repair. They sent me an updated part. Thanks everybody and Part Select for your help.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Deborah from Kearney, MO
Parts Used:
WR55X10942C
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
no ice no water coming out of door and started making a clicking noise
I read other reviews then decided it was my main control board.Watched the video for install. It was easy to change out.Everything is working great again.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Maxime from Jamaica, NY
Parts Used:
WR55X10942C
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
Clicking sound emitting from main board, unit stopped.
I unplugged the unit, replaced the main board, repowered and observe for a few minutes. my fridge is okay again.
1 of 4 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sylvia from Supply, NC
Parts Used:
WR55X10942C
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Freezor & Refrig Too Hot Too Cold,Dispenser Work Sometimes
Unplugged side by side took about 4-5 screws out removed plate from back, unplugged the wires removed old board and plugged wires in new board, note: new board a little different than original. Screwed plate back in. So far so good. I do not think I will buy any more ge appliances, this one was very expensive but out of warranty now my ge dishwasher is making noise all purchased at same time.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Harry from Lincoln, NE
Parts Used:
WR55X10942C
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
"ghostly" sounds from refrig fan
read on line that fan control in main board can cause erratic running of the fan causing "whooing" and ghostly sounds. New board installed and now I have the quietest fridge in the neighborhood. Here's the unbelieveable part. Ordered the part online from parts select on good friday morning. Fed ex delivered it just after lunch the next day (saturday). Now that's the best service I've ever received!!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Anthony from BUCKEYE, AZ
Parts Used:
WR55X10942C
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Ice & Water dispenser not working
Ice & Water dispenser did not dispense. When pushing on the dispenser lever, the entire unit briefly lost power and reset as though the appliance was unplugged. I heard a click from the back of the unit where the main board was located.
Fridge made ice but didn't operate. I determined the micro-switch and solenoid were working properly. So the only thing that could be wrong was the board.
Removed main board panel with screw/nut driver. Unplugged board connections. Un-snapped main board from housing assembly. Installation is the reverse.
Very easy. Only needed was a screw/nut driver. Electrical connections are easy since the harnesses can only fit to their own connection. No way to make a mistake.
Took no more than 10 minutes.

Problem solved!
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Scott from Fort Worth, TX
Parts Used:
WR55X10942C
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Socket set
Freezer stuck in Defrost cycle. Ice and water dispenser broken - turns off compressor when dispenser is used.
Partselect.com has a great video on how to replace the main control board. Very easy to do this repair.

It took me less that 5 minutes to complete.

Once the part was replaced, my defroster in the freezer is working perfect. The ice and water dispenser is working, too.

I saved myself $$$ going through Partselect.com rather than calling a repairman or replacing the fridge.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
William from Maitland, FL
Parts Used:
WR55X10942C
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Pliers
Compressor stoped running with no warning or noise.
Opened the back panel and removed the old board and replaced it with the new one. The new board had a couple of extra connectors that are not used. Replaced the cover and turned it back on, everything was working fine after that. This is the second refrigerator that has lost the main board in a month, Putting surge suppressors on both.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the GBS22KBSCBB
121 - 135 of 337