GDS18SBRALSS General Electric Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Patricia from Oxford, MI
- Parts Used:
- WR60X10300
- Difficulty Level:
- Easy
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers
the new motor was slightly larger than the old one and the bracket does not fit
Had to get behind the refrigerator and clean the drain out first and that took at least and hour. Just unplug the old motor. Took the old parts of the old motor, put them on the new one and plugged it back in.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- MARTIN from RIVER FALLS, WI
- Parts Used:
- WR09X10107
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
Smelled electrical/plastic burning. Pulled out refrigerator and noticed small flame near compressor.
Unplugged refrigerator. Removed relay by unclipping wire and pulling relay off compressor. Looked-up part number and ordered part. Replaced part and plugged in refrigerator.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Edward from McKinney, TX
- Parts Used:
- WR60X10300
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Refrig would not cool, freezer worked fine
Barry G was right on with instructions and expectations of the process to trouble shoot parts and how to replace. Barry also provide the right part numbers for replacement items. Thanks again Barry.
Was this instruction helpful to you?
Thank you for voting!