All Installation Instructions for General Electric Refrigerator GTS16KBMDRCC

Customer:: James from New Hope, PA
Parts Used:: WR60X31522, WR02X12008
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Screw drivers

Burned out fan

As explained on your how to on the web. Ordered by phone ---A1--Arrived as promised-- The kind of service we used to expect.

Was this instruction helpful to you?

Customer:: David from Barstow, CA
Parts Used:: WR60X31522
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Screw drivers

fridge warm, no fan blowing air to fridge.

the hardest part for me was the fan blade clasp.still only took like 20 minutes.But the best part was, the part was delivered and fixed within 24 hours of buying online. Great service guy's, Thanks.

Was this instruction helpful to you?

Customer:: Randy from Flagstaff, AZ
Parts Used:: WR60X31522, WR02X12008
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Pliers, Screw drivers, Socket set

changed the fan motor in my refrigerator

Bought the part and did it. Super easy with any kind of mechanical ability. It took 18 minutes from start to finish, I think it took longer to clean out the freezer section and restock it, than the actual job did.

Was this instruction helpful to you?

Customer:: Stephen from Philadelphia, PA
Parts Used:: WR60X31522
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Pliers, Screw drivers

Refridgerator was warm, Evaporator Fan was stuck

Followed the video by Parts select. Very accurate to remove and replace. The only trouble I ran into was getting the clip back onto the fan blade shaft! Have to improvise and use a wirenut to spread it and it went right onto the shaft. Now working perfectly! Thanks for the video and the fast part service shipping...

Was this instruction helpful to you?

Customer:: betty from mount vernon, NY
Parts Used:: WR60X46086, WR60X31522, WR02X12008
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Screw drivers

fan motor

watch the video very good

Was this instruction helpful to you?

Customer:: Glenn from Lincoln, MI
Parts Used:: WR60X31522
Difficulty Level:: A Bit Difficult
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Pliers, Screw drivers

Loud noise from the freezer area during the defrost cycle

Removed all the freezer inside panels to inspect the motor before I ordered the part. It looked like a relatively easy job to change it. I also watched the really nice video on the website that re-inforced my confidence in doing the job. The part came in a few days. I disassembled the freezer interior exactly as the video showed.(Warning: be careful with the styrofoam piece if the fridge is not fully defrosted. The ice build-up could cause it to break when trying to pull it out!)The only problem I had was getting the little collar on and off the motor fan shaft, and getting the fan off the shaft. I had to pull really hard for it to come loose and then I had to push really hard to get it back on the new motor shaft. I didn't know if could have used any kind of lubricant or not, so I didn't. After that the re-assembly inside the freezer went well, being careful to put everything back in the correct order and position. Started the fridge back up and it has been running very quietly ever since. But, most important, my wife was impressed with my work and is very pleased with the result!

Was this instruction helpful to you?

Customer:: stephen from vernon, AL
Parts Used:: WR50X10071
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Screw drivers

fridge stoped cooling

unplug fridge! removed ice maker. removed the back panel in frezer. I uncliped thermostat; cut wires on thermostat and installed new thermostat.

Was this instruction helpful to you?

Customer:: Frank from Sarasota, FL
Parts Used:: WR60X46086, WR60X31522
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

Noisy evaporator fan motor

I replaced the noisy evaporator fan motor after watching the video provided. All went well and now I have a much quieter refrigerator. I took apart the old evaporator motor to see why it rattled when moved and it had an electrical part that came undone and was the cause of the obnoxious noise that came from the refrigerator. Now, my wife and I can sleep better now that the noisy fan was replaced.

Was this instruction helpful to you?

Customer:: Kenneth from Trinity, TX
Parts Used:: WR60X31522, WR02X12008
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Pliers, Screw drivers

Fan was making a VERY LOUD noise

First I looked at the video on changing out the fan.Made a lot of difference. Everything was covered and made it simple. Wish I had gotten two grommets but the back one was in good shape and worked fine. My hearing isn't great but now I can't even hear the thing run unless the freezer door is open. The shipping was great! You sent it out immediately and in a few days it was here.

Was this instruction helpful to you?

Customer:: Dale from Williamsburg, OH
Parts Used:: WR60X31522
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Pliers, Screw drivers

noisy motor shaft loose

I simply followed the online video instructions.made the job easy and fun.

Was this instruction helpful to you?

Customer:: Richard from Sturgeon Bay, WI
Parts Used:: WR60X31522
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Screw drivers

Loud evaporator motor

Actually watch your video and it was really easy.

Was this instruction helpful to you?

Customer:: David from Simpsonville, SC
Parts Used:: WR23X37285
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

light switch quit working

removed the inside fridge electrical panel and swapped switches

Was this instruction helpful to you?

Customer:: Jules from Crowley, LA
Parts Used:: WR23X37285
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Pliers, Screw drivers

failed light switch

I started removing the switch by prying on the right side with a screwdriver, when it emerged enough I used pliers to finish removing it. I then unpluged rhe wires from the bad switch and pluged them on the new switch and "poped" it into the hole.

Was this instruction helpful to you?

Customer:: LaNita from Petrolia, CA
Parts Used:: WR60X10168
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Socket set

The fridge was making a strange bird like whistle

The repair went smoothly and surpising easy! Get access to the back of the fridge. Unplug fridge, remove cardboard but save to put back in same place. For our fridge it was to bolts removed by socket set, removed old condenser fan motor (applyed a little pressure) and placed the new condenser fan motor in. It's easier with two sets of hands, but I've got to say DIRECTIONS OTHER THEN CUSTOMERS TESTIMONY SHOULD BE SENT WITH THE PART!! Otherwise quite simple.

Was this instruction helpful to you?

Customer:: Cynthia from Seatac, WA
Parts Used:: WR23X37285
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

switch wouldn't come out anymore and turn light on

Gently pry out switch in door jam with screwdriver and pull both connectors off and put connectors on new switch then push switch back into the hole. Looked it up on the internet and video showed how to and also had link to new part, ordered and less than a week later the fridge is bright again. I have an older freezer also and it seems that they all use the same switches. Very Very easy

Was this instruction helpful to you?

GTS16KBMDRCC General Electric Refrigerator - Instructions