Models > GTS18DCMCRWW > Instructions

GTS18DCMCRWW General Electric Refrigerator - Instructions

Jump to:

All Instructions for the GTS18DCMCRWW

Customer:: Earl from Oviedo, FL
Parts Used:: WR57X10033
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Pliers, Screw drivers

Ice Make Not working

I monitored the ice maker after it stopped working and noticed it was not filling with water. I loosened the water feed hose to the single valve outlet and the water feed was fine. However, the single valve outlet never activated to turn on the water feed. I disconnected the waterfeed and electrical connection from the single valve outlet and removed it. Replaced it with the new one, reconnected the water feed valve and electrical connection....allowed the ice maker to cycle and it started filling the ice maker with water right away. The unit is functioning fine now. Thanks to Select parts for filling my parts order fast and accurately. Regards.....E. Tew

Was this instruction helpful to you?

Customer:: Paul from Huntington, NY
Parts Used:: WR57X10033
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Pliers, Screw drivers, Wrench (Adjustable)

Ice Maker Water inlet valve installed with the Refrigerator had a stripped threaded connection which leaked

Detached the old part from the refrigerator and disconnected the low voltage quick connect. Also disconnected the water line to the Ice Maker. Reinstalled the new part in the order it was disconnected and re attached the water line feed to the valve threaded connection. Turned water on and no problems.

Was this instruction helpful to you?

Customer:: William from Rockville, MD
Parts Used:: WR72X10086, WR72X10055, WR32X28066
Difficulty Level:: A Bit Difficult
Total Repair Time:: 30 - 60 mins
Tools:: Screw drivers

install second set pan sliders

Because the kit did not include fasteners, had to use wood screws and superglue.

Was this instruction helpful to you?

Customer:: CURTIS from OCALA, FL
Parts Used:: WR57X10033
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)

Icemaker Froze Up/ Stopped Making Ice.

Your online instructions were easy to understand and follow. I replaced the outlet valve which took about 20 min. Then I had to dissasemble and remove icemaker to de-ice inlet tube and back wall of frezzer to defrost cooling fins. All to gether it took me about 1hr / 40 min. Frezzer now works just like new. Thanks for making it affordable and easy. Curt

Was this instruction helpful to you?

Customer:: James from St Johns, FL
Parts Used:: WR57X10033
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Wrench set

water leaking on floor from ice maker valve

Replaced single outlet valve for the ice maker

Was this instruction helpful to you?

Customer:: Carlin from Willits, CA
Parts Used:: WR57X10033
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Wrench (Adjustable)

ice maker wasn't working

removed old valve, installed the new one. ice maker back to making ice.

Was this instruction helpful to you?

Customer:: Phillip from Atlanta, GA
Parts Used:: WR57X10033
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Screw drivers

Ice maker was not getting water

Ordered the part from "parts select". Removed old part, installed new part by unscrewing the old switch, simply cutting supply hose ...pluging in the new part and re-attaching water supply line. 10 minutes at most.

Was this instruction helpful to you?

Customer:: paul from east hanover, NJ
Parts Used:: WR23X37285
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers

refig light did not work

per your instructions

Was this instruction helpful to you?

Customer:: Ralph Q from Independence, MO
Parts Used:: WR57X10033
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Pliers, Screw drivers, Wrench (Adjustable)

Replaced valve to ice maker

had to replace copper water line to valve

Was this instruction helpful to you?

Customer:: James from New Sweden, ME
Parts Used:: WR57X10033
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Pliers, Screw drivers, Socket set

Ice maker not working

With help from this site, It was one of three things. I thought it might be what this site suggested the most common and it was. the valve in back of refrigerator at bottom. Water comming to it, but not getting past. Ordered part. Was here in a few days. Real easy to change out. A few screw / bolts and one wire that fit only one way. I did have to bend new bracket to make it fit. Now have lots of ice cubes!

Was this instruction helpful to you?

Customer:: Tom from Dahlonega, GA
Parts Used:: WR57X10033
Difficulty Level:: A Bit Difficult
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers, Wrench set

did not work, not sure what the problem is

water runs in now but still does not make cubes. just keeps dripping until I shut the water off.

Was this instruction helpful to you?

Customer:: STOYAN from ARLINGTON HEIGHTS, IL
Parts Used:: WR50X10025
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins

a lot of ice in the freezer-and in the refrigerator is warm

HI I am Stoyan. I had a problem with my refrigerator. The freezer produces a lot of ice, but the refrigerator was warm. I try to find what other people comment on this site partselect.com. I decided that the thermostat is damaged. I ordered the thermostat from partselect.com and I had the delivery within 24 h. and I was very happy with the fast delivery service .I saw a video on the same site how they show how to do myself the change of the thermostat. I took the hairdryer from my wife to defrost the refrigerator for 40 minutes and removed the old thermostat. I decided to test the heater with a 9 volts electricity from a portable charger for a car. I made an electric circuit chain and on the end of the heater I saw that there was 9 volts electricity and I understood they are ok. I changed the thermostat for 5 minutes, looking very carefully to match the colors of the cables. For $ 11, I saved money to buy a new refrigerator or pay a big bill to a repair service. Thank you for the video that helped me very much. My refrigerator work well.

Was this instruction helpful to you?

Customer:: David from Simpsonville, SC
Parts Used:: WR23X37285
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Screw drivers

light switch quit working

removed the inside fridge electrical panel and swapped switches

Was this instruction helpful to you?

Customer:: Bob from Fair Haven, MI
Parts Used:: WR57X10033
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins
Tools:: Nutdriver, Screw drivers

Frozen and split water valve

Hi, My furnace when out when I was away, frozen water lines were repaired, but my ice maker line was turned off, the valve split open. Summer is coming I want ice! I found the right replacement, ordered it, watched the free video, did the repair. It was so easy. And I saved an expensive service call. I am drinking a soda with ice from the ice maker as I type this! Thanks for solving my problem, I will be back next time something needs a part! Bob

Was this instruction helpful to you?

Customer:: Jules from Crowley, LA
Parts Used:: WR23X37285
Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Pliers, Screw drivers

failed light switch

I started removing the switch by prying on the right side with a screwdriver, when it emerged enough I used pliers to finish removing it. I then unpluged rhe wires from the bad switch and pluged them on the new switch and "poped" it into the hole.

Was this instruction helpful to you?

All Instructions for the GTS18DCMCRWW