PSA22MIPHFBB General Electric Refrigerator - Parts

This snack pan, also known as drawer, is made to hold food items in your refrigerator. It is clear in color and measures about 15 inches by 15 inches at the base of the pan. It is made entirely of plastic.

This is the replacement micro switch, or dispenser switch for your refrigerator. It is gray in color and measures approximately 1 inch by half an inch. The dispenser switch is what tells your refriger...

This fan motor circulates the air through the refrigerator grille and cools the compressor and condenser coils. It also helps to evaporate extra water in the drain pan.

This is a replacement fill tube and grommet assembly for your refrigerator. This part acts your water line to your ice maker. If you’re noticing water in the back of the refrigerator or any kind of le...

This lower light shield is a manufacturer-approved OEM part for your refrigerator. The lower light shield covers the refrigerator lighting assembly, and should be replaced if it is broken or stained w...

This OEM filter measures 2.1-Inches by 2.2-inches by 12.7-Inches. It is used to reduce bad tasting water, while also lessening dirt, rust, and other sediments. It is recommended to replace this filter...

This humidity slide is located on the handle of the vegetable/meat drawer.

3 terminal.

This is the replacement drawer side rail for the left side of your refrigerator. It is made of white plastic and is approximately 12 inches long, and 2 inches wide. The slide rail supports the crisper...

This part is a replacement recess trim for your refrigerator. It is the trim that runs around the perimeter of the ice/water dispenser. You will want to replace the recess trim if it is cracked or dam...

This is a screw to fit your refrigerator. The screw features a Philips head and measures about 0.75 inches in total length. The screw is type AB, with a gauge of 18 and 8 threads per inch.

This part is the replacement torsion-fit spring for your refrigerator. It is made of metal and is sold individually. The torsion-fit spring provides tension to return the ice funnel back to its normal...