PDS22MBRACC General Electric Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Michael from Baldwin, NY
- Parts Used:
- WR55X10942C
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
Refrigerator wasn't cooling
Very simple fix by replacing the mother board. Your "how to" video made the repair even easier. The appliance repair estimate was over $400. I saved over $200. I already recommended your site to several other people. Thanks for making it so easy
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- QUOC-LOC from LYNN HAVEN, FL
- Parts Used:
- WR55X24064
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
The control board generated clicking noise. Temperature display wrong values.
On the internet forum I read that if the control board needs to be changed , do the same for the Run Capacitor/relay.
The Ge profile refrigerator was 15 years old. First I disconnect the power cord,
I removed the control board at the back of the fridge, replaced it with a new one and did the same for the run capacitor.
Plugged the power cord back and it works fine. GE repair service did not want to come to do it. DIY is fine.
The Ge profile refrigerator was 15 years old. First I disconnect the power cord,
I removed the control board at the back of the fridge, replaced it with a new one and did the same for the run capacitor.
Plugged the power cord back and it works fine. GE repair service did not want to come to do it. DIY is fine.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Louis from LEAGUE CITY, TX
- Parts Used:
- 40A15
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver
Change bulb
Easy
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Trevor from Brooklyn, NY
- Parts Used:
- WR55X10942C
- Difficulty Level:
- Difficult
- Total Repair Time:
- 1- 2 hours
Refrigerator failed to get cold.
the new board was more complicated than the old, however the install instructions seem to have anticipated this. It works for mow. thanks for inquiring'
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- joseph from Middletown, DE
- Parts Used:
- WR55X10942C
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
refrigerator clicking noise
removed cover from rear of refrigerator. disconnect mother board connections. Unplug first, used needle nose pliers to squeeze plastic tabs holding on motherboard and replaced old with new and plugged back in connections. Plug back in refrigerator and done.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- lisa from houston, TX
- Parts Used:
- WR55X10942C
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Refrigerator kept turning off and on
I easily removed the screws and then removed the board and took a picture so I would remember how to re-connect it. It was really easy and now my refrigerator is working great. If I can do it anyone can do it. My husband was amazed that I did it all by myself.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Roscoe G from ROCHESTER, NY
- Parts Used:
- 40A15
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Light burnt out.
Turned the wire protector to the side. Turned out the old bulb and replaced it with the new. Turned the wire protector back in place and I'm like new.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alicia from Nutley, NJ
- Parts Used:
- WR55X10942C
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
freezer and frige stopped getting cold. had repairman come to check . thought it might be the board but wasn't sure (not very helpful). afer replacing board it took o time to get cold. no problem since.
very easy repair, simple exchange
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cindy from Phoenix, AZ
- Parts Used:
- WR55X10942C
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Ice dispenser quit and then fridge quit altogether
disconnected wire harnesses, popped out old board, popped in new board....5 minutes
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from Maitland, FL
- Parts Used:
- WR55X10942C
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Pliers
Compressor stoped running with no warning or noise.
Opened the back panel and removed the old board and replaced it with the new one. The new board had a couple of extra connectors that are not used. Replaced the cover and turned it back on, everything was working fine after that. This is the second refrigerator that has lost the main board in a month, Putting surge suppressors on both.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Daniel from Levittown, NY
- Parts Used:
- WR55X10942C
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Top of freezer side to warm, bottom of refrigerator to cold
I unplugged the refrigerator. I removed cover plate with nut driver. I removed all wire harness plugs from old board and removed old board using needle nose pliers to squeeze existing holding clips. Old board came right out. I then snapped new board into place and replaced all the plugs. I replaced cover with nut driver and plugged in the refrigerator. Its been two weeks and all seems to be working fine.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gaylene from Townsend, MT
- Parts Used:
- WR55X10942C
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Freezer side frosting up then quitting,
I ordered a new electronic board from GE. Took the cover off of old board located on back of refrigerator. Removed old board and installed new. Instructions were included. I also visited the GE website and watched an installation video. Very good instructions.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Deborah from Kearney, MO
- Parts Used:
- WR55X10942C
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Pliers
no ice no water coming out of door and started making a clicking noise
I read other reviews then decided it was my main control board.Watched the video for install. It was easy to change out.Everything is working great again.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Maxime from Jamaica, NY
- Parts Used:
- WR55X10942C
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Pliers
Clicking sound emitting from main board, unit stopped.
I unplugged the unit, replaced the main board, repowered and observe for a few minutes. my fridge is okay again.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Harry from Lincoln, NE
- Parts Used:
- WR55X10942C
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
"ghostly" sounds from refrig fan
read on line that fan control in main board can cause erratic running of the fan causing "whooing" and ghostly sounds. New board installed and now I have the quietest fridge in the neighborhood. Here's the unbelieveable part. Ordered the part online from parts select on good friday morning. Fed ex delivered it just after lunch the next day (saturday). Now that's the best service I've ever received!!
Was this instruction helpful to you?
Thank you for voting!