TBT16SABBRWW General Electric Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Lonnie from Covington, LA
- Parts Used:
- WR71X10378
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
added an additional shelf
just pushed it in ! THANKS FOR THE GOOD SERVICE
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carol from Farmington Hills, MI
- Parts Used:
- WR32X10398
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Our drawer cover was cracked and caving in
It took seconds to remove the old one, slide in the new one and put the drawers in place and it appears to be sturdier than the original one!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from Anchorage, AK
- Parts Used:
- WR32X10398
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Veg. drawer cover cracked front to back
Replaced with new from part select.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Elizabeth from New York, NY
- Parts Used:
- WR32X10398
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Plastic shelf (vegetable drawer cover) had cracked in the middle.
Utterly simple! No tools required. Just lifted the old shelf out of the fridge, placed the new one on its brackets, and slid the vegetable drawers right into place in the slots underneath the shelf. Perfect fit.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lewis from San Bernardino, CA
- Parts Used:
- WR32X10398
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Cracked Veggie Drawer Cover
Very Easy, remove the two veggie drawers, lift old cover out. Install much stronger new cover, install the two veggie drawers and you are finished.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jim from Sarasota, FL
- Parts Used:
- WR12X10108, WR12X10107
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
The handles on my GE fridge had yellowed over 12 years use.
Just took the old ones off, the new ones went right on. Took less than 10 minutes. It`s nice to order parts and get the right ones on the first try.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alfred from Hudson, NH
- Parts Used:
- WR32X10398
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
draw slide broke off
removed broken crisper cover and replaced with new one put draws back in
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Altin from Roslindale, MA
- Parts Used:
- WR32X10398
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Brooken plastic
Very easy
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Peter from Brooklyn, NY
- Parts Used:
- WR32X10398
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
the Vegetable Drawer Cover was broke in several places
We removed the old Drawer Cover and replaced it with the new one. The Refrigerator Door had trouble closing. So we inserted the 2 plastic washers as described in the directions enclosed in the packaging. It was pretty straight forward and an easy fix. Thank you Hot Point and Part Select. Pete and Bonnie, Brooklyn NY
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from Daggett, MI
- Parts Used:
- WR32X10398
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
broken shelf
after simply replacing shelf, I used the enclosed plactic washers to raise the height of door, so it would clear new shelf. It all worked as planned, thanks
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Charles R from Renton, WA
- Parts Used:
- WR60X203
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
The bottom part of fidge was warm with water droplets on the its ceiling.
Removed Ice shelf,
Remove rectangle cover by removing the two screws and lifting straight up.
Pulled fan off slowly.
Removed two hex screws holding motor bracket.
Remove cover.
Remove two hex screws holding remaining bracket from fridge.
Pull wire off motor noting where they were plugged in.
Pull apart brackets holding motor and remove motor noting how the motor and brackets fit together.
Reverse to install.
Remove rectangle cover by removing the two screws and lifting straight up.
Pulled fan off slowly.
Removed two hex screws holding motor bracket.
Remove cover.
Remove two hex screws holding remaining bracket from fridge.
Pull wire off motor noting where they were plugged in.
Pull apart brackets holding motor and remove motor noting how the motor and brackets fit together.
Reverse to install.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- william from philadelphia, PA
- Parts Used:
- WR32X10398
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
crcaked cover
remove 2 drawers , remove old cover by lifting out. unpack new cover , slide into place . perfit fit . return drawers , frig door closed ,there was not need for any adjustments . wonderful. couldn't ask for more. it did not take three minutes. took longer to wipe down frig . p. s. very fast shipping & delivery . thank you.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- William from Berea, OH
- Parts Used:
- WR32X10398
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Drawer covers was cracked and broken.
It was easy amd it looks awesome. Thanks.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lisa from Truth or Consequences, NM
- Parts Used:
- WR32X10398
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
My vegetable drawer cover was cracked and breaking in my G.E. refrigerator.
I was so happy to find the new part went right in and fit great! I was worried because the part number changed like 3x from original part number. It also has a different design, but fit perfect! I also am glad that I found this company on Internet because price was lower than other stores that I usually by G.E. parts from. Very happy!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kenneth from Scales Mound, IL
- Parts Used:
- WR32X10398
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Drawer cover was broken.
I was amazed at the fast shipment. Recieved the part in 3 days. Removed old shelf and installed new one. Fit perfect!Thanks to Parts Select !
Was this instruction helpful to you?
Thank you for voting!