TPS24PIBEBS General Electric Refrigerator - Instructions

The video on the site was very helpful. The repair was really easy. It was exactly the way the video showed how to do it. I would definitely use this site again to find parts, figure out the "how-to", and use for skematics of appliances. Thanks.

turn off water. turn off electricity. empty freezer section of frozen food. remove ice bucket. loosen two screws holding IM to wall of refrigerator. lift off icemaker, and then unplug it as you remove it. INSTALL new IM by: putting new water funnel onto new IM. attaching adapter cord to IM. plug in IM electrical cord to refrigerator and then hang the new IM onto the two loosened screws on the refrig wall. Now tighten the two screws. the extra adapter electrical cord hangs below the new IM, but does not get in the way when you reinstall old ice bucket. reload food, turn on elec and water. PS. i had a crack in the casing of the new IM, so i got a new one, but that one was cracked too. so i just installed the second cracked one. hope it is not a problem.

The instruction video was great, mine was easy than even the video showed it to be. I changed it out in less than 15 minutes and it works great. The niocve things I didn't have to wait for a repairman or my husband to fix the problem.

REplaced old icemaker with a new one. Install simple, However that was not the problem. I then replaced the water valve. Still no ice. I check the electric connection was OK. THe problem was the elbow fitting on the top back of the refrigerater leading to the icemaker was blocked with ice.Cleared it and turned water faucet up all the way. Ice maker worked.

Watched video on website then removed old ice maker. New one went in without any problems. Working great. I am a 60 year old woman and had never done anything like this but so easy. Husband scared now, doesn't know what project I will take on next.

Turned the wire protector to the side. Turned out the old bulb and replaced it with the new. Turned the wire protector back in place and I'm like new.

Placed the glass shelf in the new shelf frame and the frame in the refrigerator.

I was unable to positively identify the replacement shelf frame on the GE web site. Part Select's exploded view made it a piece of cake!

install icemaker water was allways delivered to previous unit water is not being delivered to icemaker still having difficulty

Remove items from Freezer, remove panel and defrost condensor coils (most time consuming part of the job). Defrost Heater is held in with two screws and two electrical connectors (remove by hand or with pliers). It's worth replacing the Defrost theromostat and Defrost heater at the same time. Only cost $60 for the two parts and will ensure you have the fix. Use the "outdoor" wire nuts when splicing in the Defrost thermostat, that will ensure you don't have any issues with moisture at the splice. When defrosting the condensor coils, soak up water as the catch tray won't hold the volume of water that will melt off the coils.

I had to defrost the freezer to free the icemaker. After that the installation was plug and play with two small exceptions: 1) I had to file down the width of the left hand tine of the old stripper so that it would fit the new icemaker, and 2) the motor housing of the new icemaker was slightly wider than the old one. It fit, but just barely. But I'm back in the ice again, no dripping water, all is good.

Installing the actual ice maker was quite easy. What takes most of the time is preparing the freezer for the install. Need to remove all shelving, (and the door) to gain access to the unit. The ice maker is simple to install once access is achieved. Putting everything back together takes some time.

I unplugged my fridge. Took out food and shelves. Unscrewed 3 top screws and two nuts to remove back panel. Started at the bottom and unscrewed 2 screws , took out heater then unscrewed the 2 screws on the top one and took it out. I used a blow dryer to defrost all of the ice on the coils. I put the new one in , bottom first, then tucked the wires, and then installed the top one. I unclasped the old thermostat on the silver coil/pipe and clamped the new thermostat on. Then I unplugged the wires from the old unit and plugged in the wires from the new one and put the hanging wires in the plastic clip at the top of the unit to keep them off the coils. I put the back panel back on, put the screws and nuts in, put shelves and food back in , and I was finished. It's working great now!!!

I simple followed the video shown at part select web site. A piece of cake. accurate info. repair complete in 45 minutes. thank you part select

I had a frig several years ago do the same thing -- freezer coils icing up and temperature warm. I had watched the repairman come in and take the back off the freezer and install some part, I knew not what. So I got on YouTube and four this website with instructions and directions of how the put the part in and which part it was. I am good at trouble shooting and was very comfortable after watching the video of what to order. I ordered the part. The instructions were clear. After the coils had thawed, it took less than 30 minutes to install the new part. I installed a Defrost Heater. My refrigerator has worked ever since. I am not a mechanic nor a fixer upper. I am a 60 year old female school teacher.

Went well. Changed the Ice Maker and then the Water Valve. All good and it is making ice.