XSS23GGPECWW General Electric Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- raul from STUART, FL
- Parts Used:
- WR71X10991, WR38X10368
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
missing shelf
All you need is model number. Great site for whatever your looking for.
I've even looked up fishing reel parts!
I've even looked up fishing reel parts!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nancy from SEMINOLE, FL
- Parts Used:
- WR32X32346
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Someone broke the bottom refrigerator crisper drawer
Slide the old drawer out and insert new drawer
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from DETROIT, MI
- Parts Used:
- WR71X38317
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Dairy door was broken.
Received replacement door, aligned it then pressed it into place.
Gee, thanks.
Gee, thanks.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Frederick from GEORGETOWN, TX
- Parts Used:
- WR71X38317
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
The existing dairy door came lose fell and brokeon tile floor.
The new part installed without problem always had great service
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- carol from LAUREL, MD
- Parts Used:
- WR71X38317
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
dairy door broken.
ordered a new one; took 1 second to put in.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from KNOXVILLE, TN
- Parts Used:
- WR60X30922
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
Ice built up around evaporator fan blades and blades chipped and broke. Refrigerator was making loud vibrating noises.
Removed ice bucket, and unplugged ice maker. Removed light cover. Removed ice maker. Pulled fan blades straight up and removed. Pushed new blades on to motor shaft. Fairly easy .
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Donna from MESA, AZ
- Parts Used:
- WR71X38317
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
Part for area of butter etc got broken
aligned and pushed on by hand
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ronald from GROVELAND, FL
- Parts Used:
- WR02X10821
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
Slide control was broken
Simply slide new control slide through slot from front.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Suzette from Northridge, CA
- Parts Used:
- WR62X39469
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers
The ice maker wouldn’t switch from crushed ice to whole cube.
I looked up a YouTube video that showed the step-by-step how to replace the crusher solenoid in my GE side-by-side refrigerator.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Orill from PITTSBURG, CA
- Parts Used:
- WR55X40445
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver
Refrigerator freezer and cooling sections both about 20 degrees too warm.
I called out a repairman who used a laptop to troubleshoot. He charged me $119 just to come out. He told me that the control board wasn't telling the evaporator to periodically defrost and I noticed that it was encased in ice. Then, he gave me an estimate of $400 to replace the board. Breaking down the estimate, that would be $200 for labor, about 30 minutes, and another $200 for the board, however, he didn't have a replacement board in stock. Knowing that I could replace the board myself, I was happy to order the board from PartSelect and save on the $200 labor charge.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Daniel from BURNEY, CA
- Parts Used:
- WR02X11331
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Socket set
Loud Squeal when fan was running
WE (WIFE) took out the old parts an replaced with new one ..Be careful to get the placement of the Grommet or they "POP" out on you. fast ship on the parts too.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Trevor from ALAMOGORDO, NM
- Parts Used:
- WR60X10307
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
Motor stopped due to corrosion
Uncovering the motor is the most difficult part. Installation is stupid-easy. Put all of the coverings back on in reverse order to the way they were removed. I don't think the ice maker has to come out but we weren't using it so it came out first.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gwendoline from VERO BEACH, FL
- Parts Used:
- WR72X10170
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set
Broken rail right side of the freezer compartment that holds the ice container
As a female DIY, I found the job easy enough and the only difficulty was the correct tool to remove the two screws. It is NOT a "usual type" screw like a Philips or flat blade.. I believe the correct name is a Torx screwdriver, so check out the screw first before starting the job. There are two screws holding the runner, one at the front and another at the back. Mine was at the back where the rail had broken.
When you have the correct screwdriver then you are ready to begin.
1. Remove the ice container.
2. Remove the top shelf that sits above the ice container., it slides out.
3. Turn off the electric switch on the back upper left corner which stops the ice cubes being formed. (Just like a regular light switch)
4. The broken rail is exposed, and the two screws are visible one at the front that in my case was okay, and the other at the back holding the other screw was where the plastic rail had broken.
5. You will need to get your head right inside the freezer to be able to visualize where the screw is fitted in but it was easy to remove once you can see it, and then unscrew the front one.
6. I learned from experience of trying to screw in the back one first that it is a fiddling job and needs small hands, otherwise you might lose the screw, been there and did that! So I chose to screw the front one in sort of lose which was much easier for lining up the hole and the back screw, then I tightened them both up sufficiently secure not to break the plastic.
7. Before you hasten to whip all the things back in the fridge, TURN on the ice maker switch - top left that was previously turned off, otherwise you will have to remove the top shelf again because it hides that switch. Once done put your shelf back and then the ice drawer and all is good to go.
8. Mine is working great now, just need to be careful if you lift the drawer in and out to remember it is only plastic.
The job was easy and the only exception would be finding the correct screw driver first before starting the job, otherwise just a few minutes work to change the rail.
When you have the correct screwdriver then you are ready to begin.
1. Remove the ice container.
2. Remove the top shelf that sits above the ice container., it slides out.
3. Turn off the electric switch on the back upper left corner which stops the ice cubes being formed. (Just like a regular light switch)
4. The broken rail is exposed, and the two screws are visible one at the front that in my case was okay, and the other at the back holding the other screw was where the plastic rail had broken.
5. You will need to get your head right inside the freezer to be able to visualize where the screw is fitted in but it was easy to remove once you can see it, and then unscrew the front one.
6. I learned from experience of trying to screw in the back one first that it is a fiddling job and needs small hands, otherwise you might lose the screw, been there and did that! So I chose to screw the front one in sort of lose which was much easier for lining up the hole and the back screw, then I tightened them both up sufficiently secure not to break the plastic.
7. Before you hasten to whip all the things back in the fridge, TURN on the ice maker switch - top left that was previously turned off, otherwise you will have to remove the top shelf again because it hides that switch. Once done put your shelf back and then the ice drawer and all is good to go.
8. Mine is working great now, just need to be careful if you lift the drawer in and out to remember it is only plastic.
The job was easy and the only exception would be finding the correct screw driver first before starting the job, otherwise just a few minutes work to change the rail.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Vincent from TUCSON, AZ
- Parts Used:
- WR14X10059
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
replace seal on crisper drawer
spent 10 minutes trying to clip in the seal without any success. I emptied the crisper drawer and removed it flipped it over clipped the seal. replaced the drawer. Secret is to remove the drawer from the refrigerator.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Carla from Sublette, IL
- Parts Used:
- WR32X32346
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 30 - 60 mins
Bottom refrigerator drawer cracked tracks
Pull out old drawer and replace with new one.
Was this instruction helpful to you?
Thank you for voting!