GCL22QGTESV General Electric Refrigerator - Parts
Jump to:
Keep searches simple, eg. "belt" or "pump".
Keep water and ice properly filtered with this updated refrigerator filter. It installs in the upper right corner of select refrigerator models. Turn the old filter left to remove it, then align the a...
In Stock
Order now and your part arrives by Nov 23
$35.95
The main control board relies on this thermistor, or temperature sensor, for readings from inside the refrigerator or freezer. Those readings guide cooling decisions, including when the compressor and...
In Stock
Order now and your part arrives by Nov 23
$103.95
A leak, a dispenser that will not flow, or an ice maker that will not make or dispense ice can point to the refrigerator water inlet valve. This OEM assembly controls water flow and includes a guard. ...
In Stock
Order now and your part arrives by Nov 23
$16.95
Measuring approximately 1 inch in diameter and helps reduce vibration transferred from the running motor, this red evaporator fan grommet cushions the fan motor at its contact with the mounting bracke...
In Stock
Order now and your part arrives by Nov 23
$408.23
This electronic board (Main Control Board Assembly, Control Board, Motherboard) controls the temperature and defrost functions of the unit. This control board is located on the back of the refrigerato...
In Stock
Order now and your part arrives by Nov 23
This ice dispenser solenoid is used to move the linkage that opens the ice chute door when dispensing is activated. When power is released, the mechanism allows the flap to close and limit warm air en...
In Stock
Order now and your part arrives by Nov 23
$15.26
This OEM compression ring is used to hold the evaporator fan motor in place. Signs that you may need to replace the compression ring are if the fan is noisy, or your fridge or freezer are too warm. We...
In Stock
Order now and your part arrives by Nov 23
$15.26
This genuine OEM replacement part is a bumper for your refrigerator. The bumper is made of orange rubber and measures less than half an inch in diameter. The bumper is used to prevent the fan motor fr...
In Stock
Order now and your part arrives by Nov 23
$15.26
Control the opening and closing of the ice chute door with this plastic dispenser crank. It sits behind the dispenser interface on the inside of the freezer door and moves when activated by the dispen...
In Stock
Order now and your part arrives by Nov 23
In Stock
Order now and your part arrives by Nov 23
$81.16
For freezer airflow, the three-blade evaporator fan blade circulates air through the refrigerator and helps remove heat. It is an OEM replacement part. Confirm fit using your appliance model number.
In Stock
Order now and your part arrives by Nov 23
$14.16
This part is a replacement filter bypass cap for your refrigerator. If you intend to use an external water filtration system for your refrigerator, the bypass cap will allow you to do so. To use a fil...
In Stock
Order now and your part arrives by Nov 23