GTS20IBNCCC General Electric Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Louis from LEAGUE CITY, TX
- Parts Used:
- 40A15
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver
Change bulb
Easy
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from Houston, TX
- Parts Used:
- IM6D
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
Instructions did not cover all the parts in kit. The instructions did not cover the elbow in the back of the refg. or the filler tube. I was doing a replacment & it not address that.
I was doing a replacement so it was just a matter of removing old parts and replacingn them with new ones.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Marvin from Sidney, MT
- Parts Used:
- WR24X10122
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Torn gasket
Removed old gasket - slipped new gasket into groove. Less than 5 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Reynald from Ellicott City, MD
- Parts Used:
- WR17X11341
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
Broken drawer
Replaced drawer
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gary from Ruidoso, NM
- Parts Used:
- IM6D
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Screw drivers
Unit Changed Out Without Any Difficulty
I disconnected the ice maker by backing out the two mounting screws and lifted the ice maker out of the freezer after unplugging the unit. The new unit was placed with a plug-in adapter and mounted on the original mounting screws. The intake water adapter was snapped into place and ice was available in approximately 2-3 hours.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Monroe, NY
- Parts Used:
- WR17X11342, WR17X11341, WR12X10570, WR12X10569
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Things were broken from use over the years
Just replaced them
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Richard from Wyoming, RI
- Parts Used:
- IM6D
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver, Screw drivers, Wrench set
i place order ice maker,paid over night,4 days later recieved,would like refund for shipping back to credit card,not happy
i followed the instuction, it was easy,
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Beth from Albuquerque, NM
- Parts Used:
- IM6D
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Screw drivers
had a space for icemaker but didn't have one in there.
Initially couldnt find the "letter" on the back of the fridge to assist me in figuring out which of the 12 different directions I was supposed to use but by going through a number of them, just picked one that looked the same and tried it. Luckily, the previous owners had an icemaker and had just left everything in there except for the actual icemaker, so all we really had to do was connect the new icemachine and plug in to the frig, then get a connector hose to hook up to the water supply and we were done. We are now enjoying ice already, although we are throwing out the first couple of cubes since the water had been in the pipes for awhile. have lots of extra pieces thats for sure!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Fernandina Beach, FL
- Parts Used:
- IM6D
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
Inlet water port was blowing off back of refrigerator allowing water to leak on floor
Cut off water supply remove water inlet valve @ bottom of refrigerator. Replace valve. Replace water inlet port @ top of refrigerator directly behind icemaker allowing glue to dry. Cut on water supply. Avoid opening freezer for 12 hours allowing temperature to become low enough for icemaker to call for water. (A small leak in inlet valve will allow water to freeze in inlet port. When this happens, when the valve opens the water cannot enter because of frozen obstruction, thus blowing inlet port off back of refrigerator). Replace valve problem solved.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- earl from mount pleasant, IA
- Parts Used:
- IM6D
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Nutdriver
stopped making ice
five quarter inch screws and to wire plugs. took longer to remove food above and below it than the repairs. very good instructions.
Was this instruction helpful to you?
Thank you for voting!