GSE23GSKRCSS General Electric Refrigerator - Parts

The temperature sensor, also referred to as a thermistor, is used to monitor the refrigerator and freezer internal temperatures. The sensor is a small capsule like device that is protected by a white ...

This is an OEM clear plastic module shelf insert (door shelf trim), which is the part of the door shelf bin that snaps onto the front to keep items contained securely on the shelf. This is the shelf i...

This dual heater kit replaces the single heater. It's redesigned to use two heating elements for a better defrost cycle.

The evaporator fan grommet is used to provide a cushion between the fan motor and the motor mounting bracket in your freezer. This genuine OEM part is about one inch in diameter and is red in color. I...

This is a genuine OEM replacement door flap for the ice maker in your refrigerator. This part goes by many different names, including door recess assembly, ice door assembly, dispenser door, ice chute...

The dispenser door solenoid is the part that controls the flapper door on your ice maker, allowing it to open and close when dispensing ice. If your ice maker is not dispensing ice or water, the door ...

Quick connector for plastic water line - 5/16" to 5/16"

This OEM compression ring is used to hold the evaporator fan motor in place. Signs that you may need to replace the compression ring are if the fan is noisy, or your fridge or freezer are too warm. We...

Designed to enhance water quality in select refrigerators, this NSF-certified water filter (Standards 42, 53, and 401) reduces lead, VOCs, and more than 50 other contaminants. It ensures your water ta...

This is the replacement fruit and vegetable drawer for your refrigerator. It is made of white and clear plastic and is approximately 16 5/8" L x 15 5/8" W. The fruit and vegetable drawer slides in and...

This middle pan cover frame is a genuine OEM replacement part for your refrigerator. This piece consists of just the white plastic frame, the glass insert is not included. You can reuse the glass from...

This genuine OEM replacement part is a bumper for your refrigerator. The bumper is made of orange rubber and measures less than half an inch in diameter. The bumper is used to prevent the fan motor fr...