PVD28BYNBFS General Electric Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Cesar from ROYAL PLM BCH, FL
- Parts Used:
- XWFE
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
change water filter
un twist old one and twist the new one
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- James from NORTH PORT, FL
- Parts Used:
- WR02X44688
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Plastic outer door stop cracked in half
Unscrewed fastener and re installed new door stop
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gary from Suffolk, VA
- Parts Used:
- WR30X39345
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Was not making ice
Unpluged refrigerator, Removed 1 screw, removed cover, unplugged 2 wiring harnesses, removed second screw in icemaker lifted up icemaker, put new icemaker in pulled down to catch in hooks.installed screw in icemaker, Reconnect 2 wiring harnesses, put wiring harnesses into cutout installed cover, put screw into cover. Plugged refrigerator back in set up icemaker by morning the bucket was full of ice.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bob from BETHEL PARK, PA
- Parts Used:
- WR71X43977
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
Swivel bin had a hairline crack in corner and wasn't noticed until temperature was cooled down and crack lengthened
Bin snaps into swivel bracket, no tools needed
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Generoso from Ocala, FL
- Parts Used:
- WR51X31995, WR55X29875
- Difficulty Level:
- Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
freezer temperature was warm, but freezer evaporator frozen
unplugged the electrical connection from the wall, took out the top and bottom shelves from the freezer (freezer located in the lower part of fridge)
took out the freezer door by unscrewing 4 screws (2 on the right 2 on the left) unscrew 2 screws on the back panel, unplugged the fan cables to uncover the evaporator, disconnected the thermistor, cut the wire about 1/2 inch, unhooked and unplugged the defrost heater, unscrew 1 screw.
with 2 Splice Lock Wire Terminals connected the new thermistor with the old thermistor wires and placed it back to the evaporator.
placed the new defrost heater to the bottom of the evaporator, screwed 1 screw back and plugged it back.
took out the freezer door by unscrewing 4 screws (2 on the right 2 on the left) unscrew 2 screws on the back panel, unplugged the fan cables to uncover the evaporator, disconnected the thermistor, cut the wire about 1/2 inch, unhooked and unplugged the defrost heater, unscrew 1 screw.
with 2 Splice Lock Wire Terminals connected the new thermistor with the old thermistor wires and placed it back to the evaporator.
placed the new defrost heater to the bottom of the evaporator, screwed 1 screw back and plugged it back.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- TIMOTHY from SPRINGVALE, ME
- Parts Used:
- WR30X39345
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Wasn't making ice
Took out ice and replaced with the new one.
Was this instruction helpful to you?
Thank you for voting!