Models > GTE18DCNBRSA > Instructions

GTE18DCNBRSA General Electric Refrigerator - Instructions

Jump to:

All Instructions for the GTE18DCNBRSA
61 - 75 of 118
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Rosemary from COLUMBUS, OH
Parts Used:
WR17X30024
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Attached to hooks
Attaches to hooks
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
pat from ERIE, CO
Parts Used:
WR23X31507
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Interior light door switch broken when jar fell off shelve and hit switch
Very easy with small screw driver . Carefully pry broken switch out pull off two connectors install new switch connect as before . Unplug refer 1st . Works great . Refrigerator will not work with bad switch
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Evelyn from ALTON, MO
Parts Used:
WR23X31507
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Light switch wouldn't turn on inside light
I used the pliers to hold switch while I got screwdriver under the switch then pulled out. I THEN unplugged old one and plugged in New one and put it back in place.
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Nicole from Snowflake, AZ
Parts Used:
WR60X31522
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Fan quit working
I pulled the shrouding off, unplugged the motor and replaced it. The hardest part is slipping the fan blade off the shaft without breaking it. Works perfectly now. Also, the shipping fed-ex, regular ground was only 3 days here to arizona. Would use anytime
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Thomas from CAVE CREEK, AZ
Parts Used:
WR32X21260
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
Broken glass shelf
Replaced the glass shelf
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Leonard E from Oroville, CA
Parts Used:
WR60X31522
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver, Screw drivers
Evaporator fan motor went out
After removing 2 screws from freezer air duct and 2 screws and 2 self tapping screws from back panel, I removed all these, as well as the foam duct connector. Checked and verified 120 volts at the motor connector, indicating that the motor was bad. Ordered the motor, and 22 hours later, it arrived. 15 minutes later,and 6 screws reinstalled, it was up and running.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jennifer from N LAS VEGAS, NV
Parts Used:
WR32X21260
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Broke the glass on shelf
Just replaced the glass, easy to install.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Sharri from Charlotte, NC
Parts Used:
WR23X31507
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Child Broke Light Switch Inside Refrigerator
Pulled out broken switch with flat head screwdriver and replaced with replacement part purchased from partselect. Easily plugged in new part and replaced.
2 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from Waterford, MI
Parts Used:
WR23X31507
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Light Switch Malfunction
Really easy
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
aaron from reynoldsburg, OH
Parts Used:
WR23X31507
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Hing door brine off
Poped whole switch out with flat head screw driver. Removed wires with needle nose players and held the wires so they wouldn't get pulled back inside fridge shell. Attached wires to new part like a plug. Lights ccame back put new switch back inside wall. Shut door
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
John from Bedford Hills, NY
Parts Used:
WR60X31522
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers, Socket set
Evaporator motor burned out
No problem, had the job done in twenty minutes,Thanks John
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lana from Fort Myers, FL
Parts Used:
WR29X10092
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The fill cup kept breaking and we couldn't find the part. Did a google search and found Partselect.com who had it.
Slide it over the fill hose and just line it up and put it in the slot.
4 of 13 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
hERBERT from Phila, PA
Parts Used:
WR60X31522
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Screw drivers, Socket set
replace evaporator fan
Removed the back of the freezer, 4 screws, and then unscrewed the motor mount with fan and motor attached. Switched fan blades to new motor. Reinstalled motor mounting then back of freezer. I had to go buy the ring opener tool at the auto parts store. $12.
0 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Frank from Sarasota, FL
Parts Used:
WR60X46086, WR60X31522
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Noisy evaporator fan motor
I replaced the noisy evaporator fan motor after watching the video provided. All went well and now I have a much quieter refrigerator. I took apart the old evaporator motor to see why it rattled when moved and it had an electrical part that came undone and was the cause of the obnoxious noise that came from the refrigerator. Now, my wife and I can sleep better now that the noisy fan was replaced.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Richard from Sturgeon Bay, WI
Parts Used:
WR60X31522
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Screw drivers
Loud evaporator motor
Actually watch your video and it was really easy.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the GTE18DCNBRSA
61 - 75 of 118