PSE25KSHKHSS General Electric Refrigerator - Parts

The shelf stop in your refrigerator is what locks the shelf into the refrigerator liner. The shelf stop can be found attached to the shelf. To remove the shelf stop, begin pulling the shelf out until ...

This part is the replacement water line for your refrigerator. It is a long plastic tube, which is 5/16 of an inch in diameter. If your refrigerator is leaking, or will not dispense water or ice, you ...

Also known as Chill Cover.

This is a replacement evaporator fan grommet for your refrigerator. The fan grommet absorbs the vibration from the evaporator fan motor for quiet operation while it runs. If your evaporator fan is unu...

This part is a replacement pan cover gasket for your refrigerator. You will find the pan cover gasket on the meat pan, and it helps to seal the pan. If the pan cover gasket is lost or damaged, it will...

This motor is used to activate the blades to crush the ice for dispensing. This part is now threaded with a left hand thread and the J nut is no longer required.

This fan motor circulates the air through the refrigerator grille and cools the compressor and condenser coils. It also helps to evaporate extra water in the drain pan.

This is a replacement fill tube and grommet assembly for your refrigerator. This part acts your water line to your ice maker. If you’re noticing water in the back of the refrigerator or any kind of le...

This door gasket is used to seal the freezer door when closed.

This is the replacement bucket auger for your refrigerator. It is approximately 20 inches long and 14 inches wide. The bucket auger sits within the ice maker assembly and rotates to push the ice from ...

This is the replacement door handle for your refrigerator. It has a slightly curved shape, is chrome in color and is approximately 34 inches long and 2 inches wide. The door handle allows you to open ...

10-16 pl pnp 5/8 szn - Sold individually.