LGTR2042TP0 Frigidaire Refrigerator - Instructions

We had no problem at all. My youngest brother and my 9 year old Son installed it. I was not there at the time but I assume it took no longer than 30 minutes. Thanks so much. Justino

Thanks to the great parts page I found the ones I needed and their are more handle,s for this frig I was able to get the right one the first time. Putting it on was simple.

Opened refrigerator door, opened a Corona, took a sip,removed old gasket from its track by simply pulling out of the track with my fingers; took another sip, installed new gasket by lining it up and pressing it into the track with my thumbs (It's good to have opposal digits) starting at the top center and progressing clockwise, closed refrigerator door, minus one Corona. Sat on the patio and enjoyed the rest of my Corona. Life's good!

Used screwdriver to pry off edge of old gasket corner and peeled off old gasket. Snapped new gasket into door channel and made sure all the edges were seated. Took longer to open the shipping package than to do the repair.

A no brainer, just unpacked and placed on top of crisper!

Installed new fill valve in less than 30 minutes and waited for 24-8 hours for results to no avail. Ice maker mechanism was shot and still would not work. Went to Lowes and bought entire ice maker add on kit for my model ice box and installed in 30 minutes and have been making ice ever since. Your 99% cure rate was 100% incorrect. Save the time and effort and go to a big box store and just get a new ice maker. By the way, it only costs about $20 more to do that.

using your site, the replacement handle was easy to order and quickly filled. removed two screws and allen screw. as my Montana relative would say "a piece of cake" great site and great service. apologise for not having model number at my fingertips. larry batzel satisfied customer

The repair went very easily. I just do not understand why it is a plastic piece. This is the 2nd time I have had to replace this piece. This company is wonderful and I really appreciate all the help I get when I go online and/or call.Thanks

Old part threads : made in China (brass) New part : made in Mexico (steel). First, unplugged it from the wall. As for the valve, removed the two screws holding the valve in, disconnected the plug, took the pipe cutter, cut the blue line to the ice maker, cleaned up the cut, pushed that line into the new one and reassembled. Done!

Received the shelf viva delivery opened package took glass out put in fridge

The purchase I made was for a bottom glass shelve of a fridge. I put in the model number and ordered the glass for that model. The glass shipped, was too big and did not fit.

Removed water line. Removed two screws holding valve. Disconnected line from valve going to Ice maker. Replaced screws and water line. Most important thing in working with Parts Select was the information they provided when I called them. I had called electrolux and was given no information and was told they would send out a repairman at which point I told them to get lost. Cost of part $30.00 vs service call of $75.00.

Ordered a new handle. Fortunately we had saved the screws. The new one fit perfectly, but no screws were included. An Allen wrench and a square headed screw driver are needed. Easy with the right tools. Came in a package of two, so we have an extra.

Pulled the old one off, pressed new one into groove on door. First time it really was as easy as the instructions on line said.

I removed the four bolts holding the light switch and temp knob with a nut driver, unplugged the unit and moved it to the table top. I removed the switch and replaced it with a new one. I plugged the unit back in and drove the four screws in with a nut driver and the light now comes on when I open the door. Real simple!