LGTR1842TP0 Frigidaire Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Charles from Rogers, AR
- Parts Used:
- 240350608
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken crisper glass
easy
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- R E from Clovis, NM
- Parts Used:
- 240358926
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken bracket for drawer
Installed new shelf, put drawer in.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Donald from Sioux Falls, SD
- Parts Used:
- 5303918823
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door Handle
Thanks to the great parts page I found the ones I needed and their are more handle,s for this frig I was able to get the right one the first time. Putting it on was simple.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Grant from Apache Junction, AZ
- Parts Used:
- 241554901
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Light Would Not Come On.
I removed the four bolts holding the light switch and temp knob with a nut driver, unplugged the unit and moved it to the table top. I removed the switch and replaced it with a new one. I plugged the unit back in and drove the four screws in with a nut driver and the light now comes on when I open the door. Real simple!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jesse from Woodstock, GA
- Parts Used:
- 242252603
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Socket set
Valve nut stripped
Old part threads : made in China (brass) New part : made in Mexico (steel). First, unplugged it from the wall. As for the valve, removed the two screws holding the valve in, disconnected the plug, took the pipe cutter, cut the blue line to the ice maker, cleaned up the cut, pushed that line into the new one and reassembled. Done!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Gaylord from Riverside, CA
- Parts Used:
- 242252603
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Wrench (Adjustable)
Ice cubes were half the normal size to none at all
Remove back cover (5 screws )remove valve ( 1 screw ).Disconnect in and out water lines. Disconnect wire on solenoid. Install in reverse. Dont forget to turn off water.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Kenny from Olton, TX
- Parts Used:
- 242252603
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver, Pliers
valve busted
I took 2 screws loose and undone water lines, replaced and reconnected everything. Real easy
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Barbara from Hialeah, FL
- Parts Used:
- 240358926
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken shelf slider frame
As simple and easy as removing the old and sliding in the new!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- marilyn from Federal Way, WA
- Parts Used:
- 240358926
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The plastic guide broke loose from the bottom side of the shelf unit.
I removed the shelf unit and glued the broken end of the drawer guide back into place, then after drying, I reinstalled the unit. 10 days later,(1 day after receiving the order) the other end of the same glide broke and I installed the New unit.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- sally from Jacksonville, FL
- Parts Used:
- 5303918823
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers, Screw drivers
Broken freezer handle
Ordered a new handle. Fortunately we had saved the screws. The new one fit perfectly, but no screws were included. An Allen wrench and a square headed screw driver are needed. Easy with the right tools. Came in a package of two, so we have an extra.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- WENDY from MONTROSE, CO
- Parts Used:
- 240350608
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
shattered bottom shelf (crisper shelf)
Simple drop-in. No tools. Less than one minute "repair" time. Worrying that the glass would break en route was for not; huge box with lots of peanuts and bubble wrap prevented any potential breakage. Very satisfied with price, shipment (including time), and overall "repair".
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Bia from Rochester, NY
- Parts Used:
- 240350608
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
The glass shelf crashed and burned.
It was as easy as pie. We just carefully slid the shelf into place. That was it.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Admirald from North Lauderdale, FL
- Parts Used:
- 240350608
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
crisper glass shattered while cleaning
Insert new glass into slot. Took less than 2 minutes.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lisa from Broadview Hts, OH
- Parts Used:
- 240358926
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
shelf gliders were broken.
This repair was very simple. I removed the old glass shelf and slid the new one in. I then slid the lunchmeat drawer into place. It looks wonderful and the drawer slides nicely in and out.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Alejandro from Auburn, AL
- Parts Used:
- 240350608
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
crisper glass broke in thausand peaces
it was easy my wife did it wen i went to the fridge it was already installed. thank you!!!!
Was this instruction helpful to you?
Thank you for voting!