FGSS2335TF0 Frigidaire Refrigerator - Instructions

carefully removed retainer from old valve

First I defrosted the entire unit, both sides for 24 hours. Restarted, I now have water dispensing. (It had apparently frozen) Next I took out the ice crushing part and took it apart, (a few screws) by removing the broken floppy piece; the small plastic floppy door that allows ice to crush, replaced this small piece, rather than replacing the entire big plastic piece that I ordered. Used a slot screw driver removed the old floppy piece that was broken and removed the same piece from the new one and switched them out. Reassembled the entire unit (a few screws), put the ice back in and it works great. I got the instructions for taking apart this from this site, however, it was fairly easy to figure out. Just be patient with the plastic parts.

I put the new unit up to the old one to see exactly how it goes, took the 2 screws holding the unt off...Took the 3 water lines off with adjustable wrench, put back exactly the same way and it worked with no leaks

Replaced pan

I first ordered the wrong switch I called and got a return label and was refunded my money before even shipping the wrong switch I was helped for the right switch and it arrived in 5 days the replacement works perfectly very easy to install. Thank you

Undo a few bolts unplug power and unhook water lines then recut all lines and push in to new value

Replaced wall pins pulling center pins removeing set new ones replaced drawers. Damm Kids Busted the old ones it was easy to find your web site , parts and purchasse items as this was a new one It was diffacullt to use drawers

Use pliers to remove the broken support. Clear the remaining insert pieces with screwdriver/pliers and insert the replacement part.

just slid them in and gently taped the pegs in

The tabs were broken by kids it took 10 minutes to repair on all 4 tabs you have to remove the push pins completed to get the new tabs to fit right

Removed ice maker bin...removed screws and housing and reinstalled all...very easily completed.

I went to Frigidaire first requesting a new shelf as I needed more usable space inside the refrigerator. Despite only being a few years old, but purchased during early COVID years when it was hard to get anything due to supply chain issues etc., the refrigerator company said they no longer were making and didn’t have a way to get a replacement for a new shelf. I did a web search and found this company. I was worried due to reading a few negative reviews, but I have to say I was ultra impressed. My package came earlier than expected. It was super securely wrapped in two layers of bubble wrap and in a secure sealed box. I had it unwrapped, washed it and dried it and in the refrigerator in less than 10 minutes. I now feel like I have plenty of space for leftovers, drinks, etc. that I didn’t have before. I am very satisfied.

The u tube instructions were exactly what is needed. I had to cut off the old plastic pipes. My pipe had threaded connectors. Pex push on connection is super easy. You don't really need a block of wood to cut it if you have a sharp utility blade. If if you are sure this is the problem this is a really easy fix. Steps 1 turn off water at wall unplug electric also 2. Disc line at valve on refrigerator 3. Remove 2 screws holding valve 4. Pull valve out and remove plastic hoses and electric connections pay attention to color of pipe and electric connection. Mine were color coded. Had to cut off thread connectors. Reattach in reverse order or do one at a time. Check for leaks.

Write down where tubing goes, wiring is color coded.

Just removed new container from shipping box and slid into position in the freezer section of refrigerator.