FGHC2355PFCC Frigidaire Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Suzanne from TAVARES, FL
- Parts Used:
- 240599803
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 15 - 30 mins
broken shelf holder
You pop the old frame out, take out the glass, slide the new frame in and reinstall the shelf. No tools required. Very easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Donald from WEIRTON, WV
- Parts Used:
- 241885001
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set
Plastic gate to redirect ice to the crusher broken off
Removed ice maker bin...removed screws and housing and reinstalled all...very easily completed.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Pat from FORT MOHAVE, AZ
- Parts Used:
- 241514601
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Left glide for center shelf broke on front corner so the shelf lost support.
Unscrewed bolts, removed broken part and replaced with new glide. The part was slightly longer than original so I had to pound it in a little which slightly bowed the new part, but it works.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ronald from Warrensburg, MO
- Parts Used:
- ULTRAWF
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 30 - 60 mins
time to change water filter
first, there many different water filters. your experience will be different according to your water filter type.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Daune from OCALA, FL
- Parts Used:
- 241675704
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Screw drivers
Ice Maker was making ice erratically
After sending PartSelect the info to their troubleshooting dept. about my ice maker, they recommended replacing the ice solenoid. I did so at a cost of $102. No change, turned out replacing the ice maker(did not purchase from PartsSelect) was the issue and works fine now.
So wasted $102. FYI the part took 6 days to arrive.
So wasted $102. FYI the part took 6 days to arrive.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dale from ROME, NY
- Parts Used:
- 241974604
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Cracked meat drawer couldn’t find replacement
Parts select had the right part!
Returned others from other sellers that didn’t fit
Took 2 months to get it due to COVID but worth the wait
Exactly the right replacement!
Thanks to parts select
Don’t go anywhere else!!!!!!!!!!!
Returned others from other sellers that didn’t fit
Took 2 months to get it due to COVID but worth the wait
Exactly the right replacement!
Thanks to parts select
Don’t go anywhere else!!!!!!!!!!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- David from PFLUGERVILLE, TX
- Parts Used:
- 240350649
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Crisper Glass was broken
Took the glass out of the shipping box and it just slid right in. It was a perfect match.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ray from PADUCAH, KY
- Parts Used:
- 241885001
- Difficulty Level:
- Very Easy
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Nutdriver, Pliers, Screw drivers
ice maker stoped crushing ice
i watched the video very simple repair
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Edith from Langhorne, PA
- Parts Used:
- 241885001
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Screw drivers
Freezer leaked, no water disp. & Crusher didnt crush
First I defrosted the entire unit, both sides for 24 hours. Restarted, I now have water dispensing. (It had apparently frozen) Next I took out the ice crushing part and took it apart, (a few screws) by removing the broken floppy piece; the small plastic floppy door that allows ice to crush, replaced this small piece, rather than replacing the entire big plastic piece that I ordered. Used a slot screw driver removed the old floppy piece that was broken and removed the same piece from the new one and switched them out. Reassembled the entire unit (a few screws), put the ice back in and it works great. I got the instructions for taking apart this from this site, however, it was fairly easy to figure out. Just be patient with the plastic parts.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Jimmy from west sayville, NY
- Parts Used:
- 242252702
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Pliers, Wrench (Adjustable)
Refrigerator wasn't "winterized" ..This is a summer home, the cold winter cracked the water valve
I put the new unit up to the old one to see exactly how it goes, took the 2 screws holding the unt off...Took the 3 water lines off with adjustable wrench, put back exactly the same way and it worked with no leaks
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joseph from Florence, CO
- Parts Used:
- 241993101
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Drawers wouldnt open
Replaced wall pins pulling center pins removeing set new ones replaced drawers. Damm Kids Busted the old ones it was easy to find your web site , parts and purchasse items as this was a new one It was diffacullt to use drawers
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- harry from long beach, CA
- Parts Used:
- 240350903
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
broken cover
took out the glass popped out the cover and put the new one on and put the glass on. DONE
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- mark from jonesboro, GA
- Parts Used:
- 241993101
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Pliers
Broken tabs
The tabs were broken by kids it took 10 minutes to repair on all 4 tabs you have to remove the push pins completed to get the new tabs to fit right
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lynn from NESCOPECK, PA
- Parts Used:
- 240351061
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
Cracked crisper
Pulled out the old-put in the new.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Mitchell from FOXWORTH, MS
- Parts Used:
- 242252702
- Difficulty Level:
- Very Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Wrench (Adjustable)
I let value was leaking its self
Undo a few bolts unplug power and unhook water lines then recut all lines and push in to new value
Was this instruction helpful to you?
Thank you for voting!