Models > FRS26KR4JW1 > Instructions

FRS26KR4JW1 Frigidaire Refrigerator - Instructions

Jump to:

All Instructions for the FRS26KR4JW1
46 - 60 of 472
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Ann from Marriottsville, MD
Parts Used:
5303289501, 5304411659
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
The plastic that held the drawer in place broke
I called Part Select and ordered a new drawer. They got the item to me within 3 days! I would definitely recommend them to a friend.
12 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Andrew from Jackson, NJ
Parts Used:
5303289517
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
the LH guide rail on the drawer broke off
I slid upward and disengaged the front cover off the old drawer. Slid down the same front cover on the new one, slid the drawer in and it was like new again.

Initially i though this whole thing would take weeks, The website provided detailed exploded views, I ordered the part and it arrived in 2 days. It was too easy.
11 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Robert H. from Grand Blanc, MI
Parts Used:
297216600
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
frezer not staying cold enough to freze newly added product
took the shelves out, unscrewed the rear panel,unpluged the thermistat and uncliped it from the line.Replaced with new thermistat in the reverse order. Before turning the unit back on,allowed the coils to defrost.All of the process was shown in your vidio that I was able to view while ordering the part. Thank you
13 of 18 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Bob from Milton, WV
Parts Used:
241885001
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
housing-crusher was broken
removed ice maker box and disassembled crusher unit on front of box and installed new housing.
12 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Julie from Lexington, NC
Parts Used:
5303296575, 215162502, 215124343
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Broken Parts needed to be replaced to make drawers work properly
removed drawer in frig then I removed broken shelf replaced with new one no tools needed replaced drawer.
For freezer I had to remove baskets then the screws holding the tracks replaced tracks and put new tracks back ,put baskets back.
10 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Cherie from Santa Barbara,, CA
Parts Used:
5303289500, 5303289501, 215124343
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Storage drawers and lower track had cracked lip
It was a dark and stormy night.....

Husband: AArrgghhh - we need a new refrigerator !!
WIfe: Nope, we just need to fix this one, and I know just how to do it. (partselect.com)
Husband: (of little faith) Fine, miss smartypants, go for it...

0) Wife orders correct parts from partselect.com and they arrive 3 days later.
1) Wife manually removed the two old drawers and the Cover-storage pan (has drawer guides)
2) Wife attempts (unsuccessfully) to remove glass frontpiece from old drawer to put on new one.
3) Husband: "Lemme see that ...
4) WIfer (reluctantly): ...uh.. OK...
5) Husband puts drawer on counter and whacks it with his fist after disloging the front panel with a butter knife.
5) Wife (amazed) wow-nothing broke!
6) Husband repeats process and breaks the second front panel
7) WIfe (silently) Oh darn and shoot
8) Husband (verbally) *&%#!!!
9) WIfe (brightly) That's OK - I can glue it. No Problemo!!
10) WIfe (silently) *&%!!
11) Wife assembles old front panel onto first storage drawer
12) Wife cheerfully glues old front panel #2, prays, then assembles it onto second storage drawer.
13) Wife puts cover-storage-pan in refrigerator and slides top drawer in, noticing more friction and more play than ususal.
14) Wife notices that wheels are not included in the cover-storage-pan
15) Husband: Now we are S.O.L. for sure. We need to buy a new refrigerator.
16) Wife (OK, smugly) repairs herself to the storage shed, where she has cleverly kept the old part, which still has the wheels on it.
17) Wife removes wheels from old part and installs them onto new part without breaking anything.
18) Wife installs both drawers and is inspired to clean out the newly restored refigerator.
19) Husband (amazed) admits that family does not need to buy a new refrigerator after all
20) Teenage daughter emerging from her room in a daze, "Hey, is that a new refrigerator?"
21) Wife makes plans to spend remainder of budget that would be used to buy new refrigerator on pearl ring that she has been coveting.
22) AND THEY LIVED HAPPILY EVER AFTER....
10 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Rebecca from Athens, AL
Parts Used:
241860803
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
ice crusher blades not working
got replacement ice container with ice crusher and dispenser in the door. removed broken one and slid in the new one like a drawer and started crushing ice right away!!
11 of 14 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Calvin from Massillon, OH
Parts Used:
241684503, 241684001, 215503203
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Screw drivers
Rust had corroded Front Plate and Drive Blade
Installation was completed by following the online Parts diagram. Had to completely remove all parts, including the blades in ice crusher, and re-assemble. Glad the online diagram was clear and easy to read.
11 of 15 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Larry from Cordova, TN
Parts Used:
218740003
Difficulty Level:
Easy
Total Repair Time:
1- 2 hours
Tools:
Pliers, Screw drivers
The ice would not come out of the front door. The flap between the door and the ice would not open.
Popped off the front access panel. Removed the heat motor and repalced with the new one. It is fixed and working great. Partselect Delivered the part the day after I ordered it. Thanks!!
10 of 12 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Thomas from Niceville, FL
Parts Used:
241734001
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
There was a hole in the plastic bin where ice fell through to the freezer.
I removed the screws that held the the ice dispencer from the bin. I than removed three screws from the bottom of the bin. I put the new plastic piece on the end of the spiral piece that
pushes the ice. I inserted the spiral piece back into the hole. I than screwed the ice dispencer
to the bin and re-inserted it back in the refrigerator.
It took me about 5 to 10 minutes. It's really easy!
9 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Jeffrey from Indianapolis, IN
Parts Used:
5303918277
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Ice maker was not making ice
I replaced the solenoid first because the ice maker was not getting water. After replacing the solenoid valve, I waited about 1/2 an hour, still no water. So, I ordered a replacement ice maker. I then installed the replacement ice maker, waited a 1/2 an hour, still no water. Then, I waited overnight. Yeah, ice! WORD OF ADVICE. WAIT OVERNIGHT TO SEE IF THE ICE MAKER CREATES ICE. Not sure how long a cycle takes, but it's longer than you would think. Hope your installation is a success!
9 of 10 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Guy from Califon, NJ
Parts Used:
215501901
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Condensor fan motor failed
Removed the old fan--three small nuts and snap off connection. Ordered part and received the next day. Your company is great!!
11 of 16 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Amy from PITTSBURGH, PA
Parts Used:
5304464438
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Freezer and refrigerator stopped cooling
The site offers a video for this part which worked perfectly. In addition to replacing the part, since the cardboard panel was off, we also cleaned all the dust off of the coils which someone recommended to do annually.
8 of 8 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Mary from SOUTH LYON, MI
Parts Used:
241798231
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver, Screw drivers
Ice maker failed
Watched YouTube video. Very easy. Used my cell phone camera in ‘selfie’ mode propped up in the upper right hand corner of freezer to see the 2 hidden screws.
9 of 11 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
ROWENA from WIGGINS, MS
Parts Used:
241685101
Difficulty Level:
Really Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers, Socket set
The drum ice maker broke in half so it couldn't dependent the ice.
I had removed the housing that the drum was in and taken the screws out to get to the broken drum. I removed it there was a set of 6 blades that crushed the ice that had to go back on the same order when I removed these I put them on a piece of wire in the order they came off (so I would get them back I the correct order). Then I reversed the order and reassembled it in the opposite direction . It was fairly easy to do. I'm a 68 year old disabled woman so if I could do it I'm sure you could to. Good luck. It cost me $14.00 if I had bought the whole assembly it would have been $150.00. So it was well worth my time and effort.
8 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the FRS26KR4JW1
46 - 60 of 472