FGHI1864QP0 Frigidaire Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Joan from Saugerties, NY
- Parts Used:
- 240356501
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Support broke in half so drawer would not stay in
Removed the one screw holding the rail, positioned the new rail and put the screw back in.
This was the best company I ever dealt with - the part arrived in less than 24 hours. Incredibly fast,
and the order was right the first time.
This was the best company I ever dealt with - the part arrived in less than 24 hours. Incredibly fast,
and the order was right the first time.
Was this instruction helpful to you?
Thank you for voting!
Both left and right drawer support rails were cracked.
Removed the meat drawer from shelf. Removed shelf from fridge. There is one Phillips-head screw holding each support rail in place. Remove screw, and then each rail can be removed. Place each new rail in place, and then replace screw. Put shelf back in fridge and replace meat drawer. Total time -- about 5 minutes!
The most difficult thing was ordering the parts. The right rail is called "Drawer Support Rail - right side". Fairly self-explainatory. The left rail is called "Track". Fairly confusing. Luckily, PartSelect.com has very good photos of the parts that they sell, and one can figure it out. It would have been much easier if both left and right rails were named similarly.
The most difficult thing was ordering the parts. The right rail is called "Drawer Support Rail - right side". Fairly self-explainatory. The left rail is called "Track". Fairly confusing. Luckily, PartSelect.com has very good photos of the parts that they sell, and one can figure it out. It would have been much easier if both left and right rails were named similarly.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Anne from Morristown, NJ
- Parts Used:
- 240356501
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Thr drawer support was broken
It was just a matter of taking out 1 screw that held the old support, replacing the drawer support with the new piece and replacing the screw that held it on.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joe from Yorktown, VA
- Parts Used:
- 240356501
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Wife broke the slide
Dropped it in!! A two minute fix. No problem.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Scott from Dunedin, FL
- Parts Used:
- 240356501
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
The old support cracked and the drawer dropped when pulled out
1) Viewed the video 2) Got a screw driver 3) Removed the shelf/bracket assembly 4) Removed the old support 5) Reassembled and put back in place. It took longer to clean the dirty shelf than to fix the support. Very easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tracy from danville, IN
- Parts Used:
- 240365401
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
Drawer hanger broken
My husband simply removed the hanger and replaced it with the new one. We were irritated we thought we were going to have to purchase a new frig. An easy fix at a great price!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Greg from henrico, VA
- Parts Used:
- 241639502
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Socket set
The new motor mount screw holes were not threaded.
I had to tap the screw holes with a 8/32 tap so that the screws would not bind.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nancy from LEHIGH ACRES, FL
- Parts Used:
- 218755504
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Wrench (Adjustable)
No problems
I had no problems. Screws arrived sooner than expected. It was a very simple installation. Very pleased with both the product and service.
Was this instruction helpful to you?
Thank you for voting!
Drawer sliders broken
Hardest thing was to take all the the items and food off the shelf... Unscrew the old rails and screw on the new ones.... Put all that stuff back on the shelf.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Nancy from Bellerose Manor, NY
- Parts Used:
- 240530811
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Needed new drawer for refrigerator to replace broken one.
I broke my drawer on a holiday Monday and Tuesday morning I had the new one in. your party was an exact match, even though the description said it might not be.
Was this instruction helpful to you?
Thank you for voting!
Drawer supports broken
The repair was very simple and watching the repair demo insured it would be. Received parts with in 4 days of ordering. Removed old shelf, took out phillips retaining screw and discarded old rails. installation was the reverse process.
Was this instruction helpful to you?
Thank you for voting!
Both rails split, and the drawer would no longer stay in place
Remove the rails, and replace. Less than 5 min repair. VERY costly though for 2 pieces of plastic.
Was this instruction helpful to you?
Thank you for voting!
Broken drawer brackets
I removed the drawer and then I removed the shelf from the refridgerator! The brackets are held by one screw each. Installation was super simple!
Was this instruction helpful to you?
Thank you for voting!
The Shelf Backets Were Broken
We unscrewed the old brackets, screwed on the new ones (with the old screws)and put the shelf back in the fridge! It took longer to take all the stuff off of the shelf than to do the repair.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Donald from Sioux Falls, SD
- Parts Used:
- 5303918823
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Door Handle
Thanks to the great parts page I found the ones I needed and their are more handle,s for this frig I was able to get the right one the first time. Putting it on was simple.
Was this instruction helpful to you?
Thank you for voting!