FGHI1864QE0 Frigidaire Refrigerator - Instructions

Emptying the shelves took longer that unscrewing old part and replacing with new part. Works perfect!

The repair was easy,after I ordered the wrong part twice,called customer service,Patrica helped me determined the correct part,explained how to returned wrong parts,refunded my money. I recieved the right part, installed it, drawer works fine,thank you for the wonderful service, if I ever need appliance parts again,I'll call partselect first. THANKS DAVE

first i order a defrost termostate i replace it but wasnt the problem then i
unpluged the evaporator fan motor and test it and was not working order
a new one and working like new.

My husband simply removed the hanger and replaced it with the new one. We were irritated we thought we were going to have to purchase a new frig. An easy fix at a great price!

replaced

I had no problems. Screws arrived sooner than expected. It was a very simple installation. Very pleased with both the product and service.

pulled the draw out ,then unloaded shelf,removed shelf and unscrewed rails. I slid the rails of and put the new ones on screwed them back on and reassembled the drawer and shelf

Remove everything from shelf drawer is under. Remove everything in drawer. Remove the drawer itself. Remove the shelf the drawer slides underneath of by lifting front of shelf until legs unhook, then wiggle or gently pull until it releases from pieces legs hook into (each leg has one hook). Shelf should pull out with rails and legs attached. Remove screw with philips head screwdriver. I used a Stanley brand nut driver with philips and flathead bits included, $5 at Wal-Mart. Remove the screw holding the rail and leg together. Remove rail and replace with like part. Install screw. Hang shelf. Install drawer. Put all yer stuff back on shelf and in drawer. $50 cause step-son's kids like to pull out drawer and hang on it, go figure. Very simple fix. Do not lose screw! I put all my parts (drawer, shelf, rails, screw) on my kitchen counter. Mate your rail by aligning flat side of rail to inside flat surface of leg. Takes about five minutes. I would say good luck but you will not need it. Thank you PartsSelect for having such a user-friendly website!

Dropped it in!! A two minute fix. No problem.

One screw to remove the old part, and screwed in the new one. Easy as pie. Keep the screw from the old part as the new one did not have one.

Two screws held the top of the handle to the door and one set screw held the bottom of the handle to the door. All I needed was a phillips screw driver and an allen wrench. It took less than 10 minutes.

It was just a matter of taking out 1 screw that held the old support, replacing the drawer support with the new piece and replacing the screw that held it on.

Removed the one screw holding the rail, positioned the new rail and put the screw back in.

This was the best company I ever dealt with - the part arrived in less than 24 hours. Incredibly fast,
and the order was right the first time.

Removed the meat drawer from shelf. Removed shelf from fridge. There is one Phillips-head screw holding each support rail in place. Remove screw, and then each rail can be removed. Place each new rail in place, and then replace screw. Put shelf back in fridge and replace meat drawer. Total time -- about 5 minutes!

The most difficult thing was ordering the parts. The right rail is called "Drawer Support Rail - right side". Fairly self-explainatory. The left rail is called "Track". Fairly confusing. Luckily, PartSelect.com has very good photos of the parts that they sell, and one can figure it out. It would have been much easier if both left and right rails were named similarly.

Followed the video instructions and it works like a charm! To top it off, the part got to my house the day after I ordered it! Fantastic service!