FGHI2164QF0 Frigidaire Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
rails broke from the lunch meat drawer
pulled the draw out ,then unloaded shelf,removed shelf and unscrewed rails. I slid the rails of and put the new ones on screwed them back on and reassembled the drawer and shelf
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ernie from Campbell, CA
- Parts Used:
- 240356501
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Right side drawer track broke
Followed the video instructions and it works like a charm! To top it off, the part got to my house the day after I ordered it! Fantastic service!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Scott from Dunedin, FL
- Parts Used:
- 240356501
- Difficulty Level:
- Really Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers
The old support cracked and the drawer dropped when pulled out
1) Viewed the video 2) Got a screw driver 3) Removed the shelf/bracket assembly 4) Removed the old support 5) Reassembled and put back in place. It took longer to clean the dirty shelf than to fix the support. Very easy.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Greg from henrico, VA
- Parts Used:
- 241639502
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 1- 2 hours
- Tools:
- Nutdriver, Socket set
The new motor mount screw holes were not threaded.
I had to tap the screw holes with a 8/32 tap so that the screws would not bind.
Was this instruction helpful to you?
Thank you for voting!
Drawer sliders broken
Hardest thing was to take all the the items and food off the shelf... Unscrew the old rails and screw on the new ones.... Put all that stuff back on the shelf.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Leesburg, FL
- Parts Used:
- 240365401
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
drawer support broke
took broking one off put new one on
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- John from Cleveland, OH
- Parts Used:
- 240350609
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken glass shelf
The glass inserted easily into the space formerly occupied by the original shelf
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Clarence from Clinton, TN
- Parts Used:
- 240356501
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
meat drawer rail-right side
Really easy to repair.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dean from Harrisonburg, VA
- Parts Used:
- 240350609
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken glass shelve
Got the glass in two days time. Slid into the frame. It took less than 2 min. Great service from nice people. And the price of the glass was less than I expected. Thanks Dean
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- HCMA Benefits from Fairburn, GA
- Parts Used:
- 240350609
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broken Glass Pan Cover
Put the glass in slot and it fit perfectly
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Dave from Van Nuys, CA
- Parts Used:
- 240356501
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
broken part
installed new part
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Keith from Springfield, OR
- Parts Used:
- 240313703
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Nutdriver
Freezer door sagging due to warped hinge
Just block the door up so it doesn't fall off, remove the two screws, replace hinge, and replace screws. My wife could have done it. Metal replacement part is much better than the original plastic that warped from day one.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Thomas from Flushing, NY
- Parts Used:
- 240356501
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Broken rail on meat draw
One screw taken off, part pops out, pop in new part, replace screw ! Done.
Was this instruction helpful to you?
Thank you for voting!
Rail slides are made of plastic that broke and peeled like it were a package zip strip.
We needed to first select the correct part number. The diagram furnished at the website was sketchy and incomplete, but thanks to the helpful assistance of your patient customer service rep I was able to correctly identify and place the order for the correct part numbers. Each item arrived in lest than 48 hours using standard shipping charges [5-7 business days] much to my surprise. Disassembly and reassembly was very basic. It took longer to remove the food from the refrigerator shelf and pulling out the drawer than it did to unscrew the part and reassemble it hanging it back on the refrigerator brackets. In all it took less than 15 minutes including the removal and restocking the food back onto the refrigerator shelf. While I am not one to brag about repairing anything mechanical I must admit that this was a real morale boosting operation. Anybody with a screwdriver that is tall enough to reach the shelf and shelf brackets could repair these items. It almost took just as long to fill write this narrative as it did to do the repair. Thanks to the Customer Service Rep, she was very kind and reassuring.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Sheila M from Rosadale, NY
- Parts Used:
- 240350609
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Broke Pan Cover Glass Insert
It slips right on. The hardest was getrthe item unpacked. It was pacrvery well for shipment so it wouldn't get broken. This company has very nice customer service on the phone.
Was this instruction helpful to you?
Thank you for voting!