Models > FPBC2277RF0 > Instructions

FPBC2277RF0 Frigidaire Refrigerator - Instructions

Jump to:

All Instructions for the FPBC2277RF0

Customer:: Jack from TAMPA, FL
Parts Used:: 809089801, 5304501181, 5304501179
Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers

The trim on the water/ice dispenser was scratched and stained.

Went to website, ordered the parts. Watched the YouTube video by Partselect. Took the old trim peices off, cleaned up the opening, installed new parts. Refrigerator looks like new again. Super easy. Just used a screwdriver.

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: ELIZABETH from HENRICO, VA
Parts Used:: 242010901
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins

Wrong Part sent!!!!!

I did not do a repair. You sent the wrong part & I didn't open the package but I can't get hold of anyone to return the part and get the correct part.

I am very upset that no one will help me. I paid $ 37.28 for the part I ordered and then the wrong part was sent

The sku # on the package is 242010901.This is a roller type part and I ordered a small wheel.
I can't even find a return address to send it to.. Please help me
Elizabeth Romage
libbieinrichmond@comcast.net
8042627963

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Dennis from Lancaster, SC
Parts Used:: 241778315
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins

GASKET WORN AND LEAKING

SIMPLY REMOVE THE OLD GASKET PULLING LIGHTLY BY HAND
THEN PUSHING THE NEW GASKET BY HAND

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Andres from Golden Valley, MN
Parts Used:: 241778315
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Replaced door gaskets with new ones

Removed the old door gaskets by hand and attached the new ones by inserting the edges in the existing grooves

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Chuck from GRIFTON, NC
Parts Used:: 242220204
Difficulty Level:: Easy
Total Repair Time:: 30 - 60 mins
Tools:: Nutdriver, Screw drivers

Water outlet tubing leaking in elbow behind water filter

Most difficult and time-consuming part of the job was clearing the refrigerator of food and shelving. Replaced tubing as it had split in the factory bend of the tubing directly behind the water filter. Take your time and don't get in a hurry.

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Daniel from Hampton, NH
Parts Used:: 5304537408
Difficulty Level:: A Bit Difficult
Total Repair Time:: 1- 2 hours

Previous seal had a tear and cold air was leaking around seal

Pulled the old seal out of the groove. Placed new seal in the groove. New seal has to be heated and massaged to get it into proper form so it does not leak. I have been continuously heating and massaging to get the seal to get it in the proper form. Been working on it for a week. Almost there.

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Dennis from Oley, PA
Parts Used:: 241778315
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Thin, flexible edge on outermost door gasket was tearing from the main gasket, likely due to being rubbed when accessing refrigerator..

Gasket is held in place by an extrusion on the back side. Simply remove the old gasket and press the new gasket's extrusion into the track on the door.

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Karl from Brookfield, CT
Parts Used:: 241778315
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

Refrigerator wasn't staying cool enough

Easily removed the old gasket and put the new ones on exactly the same way the old ones came off but in reverse

2 of 2 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Albert from SAN ANTONIO, TX
Parts Used:: 243297613
Difficulty Level:: Very Difficult
Total Repair Time:: More than 2 hours
Tools:: Nutdriver, Screw drivers, Socket set

There is no power, due to the COVID-19 pandemic there no Tech support available,

My repair plan is to continue buying parts for it until is starts working. I notices a large rusty stain on the back of the refrigerator, so I replaced the Ice Maker. Then, I replaced the Evaporator Motor. Yet nothing will come on.
I called Conn's Home Plus where I bought the Frigidaire Refigerator back in February 2014. The Tech said that It needs a Board-main Power (computer part). So I it ordered from PartSelect. It is due here by July 20, 2020. The Parts and Tech cost is now over Five Hundred ($500) dollars.
HELP!! I need INSTRUCTIONS, HELP!!!
Albert F. Alfaro in San Antonio, TX.

3 of 5 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Mary from MAGNOLIA, AR
Parts Used:: 241675704
Difficulty Level:: A Bit Difficult
Total Repair Time:: More than 2 hours
Tools:: Nutdriver, Screw drivers

ice maker is stuck on crushed ice.

We had someone to come and look at it and we were told it was the solenoid valve. The repairman unstuck it for us and said when it does it again, he would have to order the part. We took it upon ourselves to order the part and DIY. We replaced the part that we were told was the problem and "guess what" it's still not fixed. It's still shooting out crushed ice. Will have to call repair guy back out here to see what we did wrong.

3 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Lewis from JONESBORO, GA
Parts Used:: EPTWFU01
Difficulty Level:: Really Easy
Total Repair Time:: 30 - 60 mins

Was time to replace my water filter

Twist to remove the old one an twist to install the new 9ne

4 of 9 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Chris from Lockport, NY
Parts Used:: 241639502
Difficulty Level:: Really Easy
Total Repair Time:: Less than 15 mins

One blade broke from condenser fan

The part i recieved, from parts select was a larger in circumfrence (<1/4) than the original. However i was not aware of this until after i treid to repair it.

I removed the broken fan from the condenser. This was very sipmle.

When i pluged the refridgerator back in to the outlet the fan tried to start up but soon began to make aloud noise, due to there not being enough clerance.

11 of 30 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: BO from SUN CITY WEST, AZ
Parts Used:: EPTWFU01
Difficulty Level:: Very Easy
Total Repair Time:: Less than 15 mins

No problem - just replace every 6 months!

Just place new filter and lock it!

3 of 6 people found this instruction helpful.

Was this instruction helpful to you?

Customer:: Dean from Pawleys island, SC
Parts Used:: 242253002
Difficulty Level:: Really Easy
Total Repair Time:: 15 - 30 mins
Tools:: Nutdriver, Wrench (Adjustable)

Refrigerator water dusoeswr stopped working

I removed the defective water valve. All wiring and tubing connectios were color coded.
It connected the water tubes and electric plugs to new water valve.
The water dispenser worked perfectly after I reconnected everything.

1 person found this instruction helpful.

Was this instruction helpful to you?

Customer:: Daune from OCALA, FL
Parts Used:: 241675704
Difficulty Level:: A Bit Difficult
Total Repair Time:: 1- 2 hours
Tools:: Screw drivers

Ice Maker was making ice erratically

After sending PartSelect the info to their troubleshooting dept. about my ice maker, they recommended replacing the ice solenoid. I did so at a cost of $102. No change, turned out replacing the ice maker(did not purchase from PartsSelect) was the issue and works fine now.

So wasted $102. FYI the part took 6 days to arrive.

1 person found this instruction helpful.

Was this instruction helpful to you?

All Instructions for the FPBC2277RF0