DGHT2144KF4 Frigidaire Refrigerator - Instructions
Jump to:
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
- Customer:
- Patrick from Penryn, CA
- Parts Used:
- 240505801
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Light switch prevented door from closing.
The switch prevented the door from closing about 5 years ago. So I just taped the switch down, and lived without a fridge light for the last 5 years. Painful! And wasteful (food spoiled because we couldn't see it.) Thought I was out of luck, assuming light switches were all the same, got fed up again, and pulled out old switch,,and searched the net for the part number, and just started calling the manufacturer. I got this website after no luck in calling, and took the step to order...and in no time, got it replaced, and we cam see now! It feels like we got a new fridge!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Lorraine from Arlington, VA
- Parts Used:
- 242161202
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
very Simple!
Insert the bottom part of the trim first, then pull up to snap on the top. PartSelect.com is a fantastic website!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- david from hamilton, OH
- Parts Used:
- 240356501
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
rail for the drawer busted,drawer won't slide
The repair was easy,after I ordered the wrong part twice,called customer service,Patrica helped me determined the correct part,explained how to returned wrong parts,refunded my money. I recieved the right part, installed it, drawer works fine,thank you for the wonderful service, if I ever need appliance parts again,I'll call partselect first. THANKS DAVE
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Susanne from Hampton, IL
- Parts Used:
- 240356501
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Broken meat drawer rail
Emptying the shelves took longer that unscrewing old part and replacing with new part. Works perfect!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Tara from Youngstown, OH
- Parts Used:
- 240338101
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Old Door Shelf Bin broke
I opened the box, looked at the part, and inserted it in the door in the appropriate place. That's it! Easy, fast, and exactly the the right part. No Problem.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Betty from Richardson, TX
- Parts Used:
- 240338101
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Shelf was broken.
Shelf was taped with duct tape and since I am a perfectionist, I couldn't stand to look at it. We are leasers, so I did the repairs at my expense and love it. Thanks for the prompt delivery. Shelf was perfect!!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Michael from Cary, NC
- Parts Used:
- 240338101
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Door shelf missing.
Opened box, removed part, placed on refrigerator door. Took longer to unpack than install.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Cyndi from Elizabethtown, PA
- Parts Used:
- 240338101
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Bottom frige door dhelf bin broke
Installation was so easy that my ten year old daughter was able to do it on her own.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Ernie from Campbell, CA
- Parts Used:
- 240356501
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Right side drawer track broke
Followed the video instructions and it works like a charm! To top it off, the part got to my house the day after I ordered it! Fantastic service!
Was this instruction helpful to you?
Thank you for voting!
drawer rails cracked/broken/will not support drawer
Remove everything from shelf drawer is under. Remove everything in drawer. Remove the drawer itself. Remove the shelf the drawer slides underneath of by lifting front of shelf until legs unhook, then wiggle or gently pull until it releases from pieces legs hook into (each leg has one hook). Shelf should pull out with rails and legs attached. Remove screw with philips head screwdriver. I used a Stanley brand nut driver with philips and flathead bits included, $5 at Wal-Mart. Remove the screw holding the rail and leg together. Remove rail and replace with like part. Install screw. Hang shelf. Install drawer. Put all yer stuff back on shelf and in drawer. $50 cause step-son's kids like to pull out drawer and hang on it, go figure. Very simple fix. Do not lose screw! I put all my parts (drawer, shelf, rails, screw) on my kitchen counter. Mate your rail by aligning flat side of rail to inside flat surface of leg. Takes about five minutes. I would say good luck but you will not need it. Thank you PartsSelect for having such a user-friendly website!
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Patricia from Satellite Beacj, FL
- Parts Used:
- 240338101
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
Bracket Broke On Shelf
New door shelf bin attacched to refrigerator door brackets
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Paul from Springfield, MO
- Parts Used:
- 240505801
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
the refrigerator door was hard to close, and upon inspection I finally decided that the light switch was making the door hard to close.
I removed the door actuated light switch with my index finger and thumb on my right hand. I then removed the two wires from the switch. I noticed that the new switch had different look to it,I think Frigidaire must have had a problem with the original design of the switch. Reassembly was just replacing the two wires and putting the new switch in place, and no more door closing problem.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Melanie M from Post Falls, ID
- Parts Used:
- 240338101
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
Door shelf bin broke
Slid new one on
But always order on phone and talk to a live person.
But always order on phone and talk to a live person.
Was this instruction helpful to you?
Thank you for voting!
- Customer:
- Joan from Saugerties, NY
- Parts Used:
- 240356501
- Difficulty Level:
- Really Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers
Support broke in half so drawer would not stay in
Removed the one screw holding the rail, positioned the new rail and put the screw back in.
This was the best company I ever dealt with - the part arrived in less than 24 hours. Incredibly fast,
and the order was right the first time.
This was the best company I ever dealt with - the part arrived in less than 24 hours. Incredibly fast,
and the order was right the first time.
Was this instruction helpful to you?
Thank you for voting!
Both left and right drawer support rails were cracked.
Removed the meat drawer from shelf. Removed shelf from fridge. There is one Phillips-head screw holding each support rail in place. Remove screw, and then each rail can be removed. Place each new rail in place, and then replace screw. Put shelf back in fridge and replace meat drawer. Total time -- about 5 minutes!
The most difficult thing was ordering the parts. The right rail is called "Drawer Support Rail - right side". Fairly self-explainatory. The left rail is called "Track". Fairly confusing. Luckily, PartSelect.com has very good photos of the parts that they sell, and one can figure it out. It would have been much easier if both left and right rails were named similarly.
The most difficult thing was ordering the parts. The right rail is called "Drawer Support Rail - right side". Fairly self-explainatory. The left rail is called "Track". Fairly confusing. Luckily, PartSelect.com has very good photos of the parts that they sell, and one can figure it out. It would have been much easier if both left and right rails were named similarly.
Was this instruction helpful to you?
Thank you for voting!