Models > FGTR1845QE3 > Instructions

FGTR1845QE3 Frigidaire Refrigerator - Instructions

Jump to:

All Instructions for the FGTR1845QE3
61 - 75 of 128
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Customer:
Susan from BRAINTREE, VT
Parts Used:
218755402
Difficulty Level:
Very Difficult
Total Repair Time:
1- 2 hours
A set scew was ordered twice.
The first order arrived in a huge box and there was no scew to be found, the box had wholes in it. I was given a refund and told to order again.



The repair did not happen and the set screw which was actually recieved the second time was returned because it was the wrong size.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Nickalas A from CUYAHOGA FLS, OH
Parts Used:
240530811
Difficulty Level:
Very Easy
Total Repair Time:
Less than 15 mins
our meat drawer handle was broken
I just put the new one in with no problem
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
gene from pensacola, FL
Parts Used:
240530811
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
broken meat drawer
new drawer was received within 2 days and was extremely simple to install.
1 of 2 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lorraine from Arlington, VA
Parts Used:
242161202
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
very Simple!
Insert the bottom part of the trim first, then pull up to snap on the top. PartSelect.com is a fantastic website!!
1 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Larry from Fishersville, VA
Parts Used:
5303918824
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Broken Door handle
replaced
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Lloyd from Belleville, IL
Parts Used:
5303918824
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Plastic Door Handle Broke
Two screws held the top of the handle to the door and one set screw held the bottom of the handle to the door. All I needed was a phillips screw driver and an allen wrench. It took less than 10 minutes.
0 of 1 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Greg from henrico, VA
Parts Used:
241639502
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Nutdriver, Socket set
The new motor mount screw holes were not threaded.
I had to tap the screw holes with a 8/32 tap so that the screws would not bind.
1 of 5 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Nancy from LEHIGH ACRES, FL
Parts Used:
218755504
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench (Adjustable)
No problems
I had no problems. Screws arrived sooner than expected. It was a very simple installation. Very pleased with both the product and service.
2 of 9 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Michael Jude from Saint Martinville, LA
Parts Used:
240311303, 240314011
Difficulty Level:
Really Easy
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Refrigerator door sagged, had to push the door to close it.
Used wood blocks to raise the door off the lower hinge bracket then unscrewed the suspect hinge. Cut a small shim, two layers of soda can, to place under the lower edge of the new hinge bracket and doubled the washers by using the old one to ensure I had adequate clearance for the door. After a little silicone lube I installed the new hinge bracket. All better now.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Brenda from Marblehead, MA
Parts Used:
5303918824
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Handle had broken at the top where horizontal part joins vertical
The repair only involves two sets of fasteners. I am a very unskilled female repairwoman and found the top two screws easily undone with a Phillips head screw driver. I did not understand how to undo the bottom fastener which was a circle with an empty center, so I took the new handle to the local hardware store where a nice employee found me an Allen wrench for 47 cents. My only request would be that the instructions had said that was needed along with the correct size. Otherwise it went very smoothly.
Was this instruction helpful to you?
Thank you for voting!
Customer:
Al from Sarver, PA
Parts Used:
240313703
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Nutdriver
Original plastic hinge cracked across the middle
Removed 2 hex screws & old hinge, placed new hinge on cabinet & found that it didn't fit; one hole was about 1/8" off. Had to drill a new hole in cabinet top in order to attach new hinge. Hinge works fine now. I'm glad to find the hinge is metal; original one was plastic.
Was this instruction helpful to you?
Thank you for voting!
Customer:
donna from ivyland, PA
Parts Used:
240350608
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
broken shelf needed replacement for refrigerator
I can't believe how fast it shipped!!! Thanks! Great job!
Was this instruction helpful to you?
Thank you for voting!
Customer:
ROBIN from HIGHLAND PARK, IL
Parts Used:
240358926
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Frame Of Glass Shelf Cracked In Several Places
All I did was take the glass shelf out of the box, slide it into the refridgerator then slide the meat drawer back on and I was done! Ordering was quick and easy, it arrived within 2 days packaged very well. This was one of the easiest repairs ever and the service was top notch!
Was this instruction helpful to you?
Thank you for voting!
Customer:
Ron from Madison, AL
Parts Used:
240358926
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
Bracket on shelf for meat tray broke
I was sent the wrong part. Had to recorder the shelf with the meat slide. The installation was very simple. Received the part the next day. Great service
Was this instruction helpful to you?
Thank you for voting!
Customer:
Christine from East Orange, NJ
Parts Used:
240358008
Difficulty Level:
Really Easy
Total Repair Time:
Less than 15 mins
No freezer shelf
Out the package and into the freezer, no tools needed, I am very happy, my stuff are now organize , no more heaps of stuff
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the FGTR1845QE3
61 - 75 of 128