FRS20ZSHB1 Frigidaire Refrigerator - Parts

This valve has a 1/4" compression inlet.

This drive blade is a little under five inches long. It is used for the icemaker of many refrigerators.

The front for this part is sold separately or you can use your existing part.

Cross Recessed Pan Head Screw Size: 10-16 X 0.500

The water inlet valve is a solenoid-operated switch and when it is energized by electrical power, water is released from the supply line through the water valve and into the compact icemaker mold or the water dispenser.

Sold individually.

The ejector drive gear is a part for your refrigerator. This icemaker drive gear is for the ejector blades. The part rotates the cube ejector arm, which cycles the icemaker and pushes the cubes out an...

Front must be ordered separately.

The filter is NOT included and the o-ring is also sold separately.

Sold individually.

The cube solenoid allows cube or crushed ice to be dispensed on demand. 120V 60Hz

This water reservoir tank kit contains an approximately forty-two foot long water line tube, two connectors, and two screws. This is a replacement kit from the original tank which is no longer available.